OSE 11P V104

For discussion and distribution of custom code and hacks
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: OSE 11P V104

Post by delcowizzid »

Doesn't really matter when 3 fire at once all cylinders getting fuel at different valve timing events
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: OSE 11P V104

Post by VX L67 Getrag »

Yeah true, just thought it was odd it had the injection delay table there!
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: OSE 11P V104

Post by delcowizzid »

Stock vn code had it too with 2 cells near idle changed God knows what effect it has
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: OSE 11P V104

Post by Dylan »

12P has a 50% value in the V6 CAL's (from memory) and V8 has it zeroed out. From my knowledge it is an opening delay more so than a EOI timing. That 50% value is in the idle cells say 800rpm 40kpa.

I've re tuned V6's with that value at zero and all is ok.
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

It delays the start of injection in relation to the reference pulse (the pulse from the dizzy/crank at the reference angle set in the cal), on a batch system I also dont know what this achieves.
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: OSE 11P V104

Post by vlad01 »

I don't think it will achieve anything
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: OSE 11P V104

Post by The1 »

noticed in xdf Kickdown - Kickdown Mode - Downshift KPH THreshold table has wrong axis labels
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

Thanks, will fix that.
Jervies
Posts: 199
Joined: Wed Nov 09, 2011 5:35 pm
cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor
Location: Victoria

Re: OSE 11P V104

Post by Jervies »

Not sure if it just a moddified adx issue or its on originals aswell but ve trace doesnt leave 20kpa colum?
Also the historgram table res is different to the histogram excel document lol.
Used 11p a few times now it works well. Have a 7000rpm spark cut
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 11P V104

Post by VL400 »

The VE tracing issue is due to baro compensated MAP being used for the VE table - this is the term the ECU is using for its lookup so is more accurate. If you use a ADX that is not for 11P V104 it will likely not work correctly. If one of the ADXs in the included 11P zip does not work can you let me know which so it can be fixed.

For the excel spreadsheet you can change the the ADX histograms to suit anything you would like. Or add new ones to do new and different things. Whats in the ADX is just a starting point and wont support every spreadsheet on this site.
Post Reply