OSE 11P V104

For discussion and distribution of custom code and hacks
User avatar
Posts: 4849
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: OSE 11P V104

Postby delcowizzid » Tue Jul 19, 2016 9:58 pm

Doesn't really matter when 3 fire at once all cylinders getting fuel at different valve timing events
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 2425
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: OSE 11P V104

Postby VX L67 Getrag » Tue Jul 19, 2016 10:03 pm

Yeah true, just thought it was odd it had the injection delay table there!

User avatar
Posts: 4849
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: OSE 11P V104

Postby delcowizzid » Tue Jul 19, 2016 10:26 pm

Stock vn code had it too with 2 cells near idle changed God knows what effect it has
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 3163
Joined: Mon Aug 02, 2010 6:35 pm

Re: OSE 11P V104

Postby Dylan » Tue Jul 19, 2016 10:35 pm

12P has a 50% value in the V6 CAL's (from memory) and V8 has it zeroed out. From my knowledge it is an opening delay more so than a EOI timing. That 50% value is in the idle cells say 800rpm 40kpa.

I've re tuned V6's with that value at zero and all is ok.

User avatar
Posts: 4988
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: OSE 11P V104

Postby VL400 » Thu Jul 21, 2016 10:58 am

It delays the start of injection in relation to the reference pulse (the pulse from the dizzy/crank at the reference angle set in the cal), on a batch system I also dont know what this achieves.

User avatar
Posts: 6315
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: OSE 11P V104

Postby vlad01 » Thu Jul 21, 2016 1:43 pm

I don't think it will achieve anything
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

User avatar
Posts: 4108
Joined: Mon Jan 04, 2010 10:23 am

Re: OSE 11P V104

Postby The1 » Sun Sep 04, 2016 11:57 am

noticed in xdf Kickdown - Kickdown Mode - Downshift KPH THreshold table has wrong axis labels

User avatar
Posts: 4988
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: OSE 11P V104

Postby VL400 » Mon Sep 05, 2016 11:47 am

Thanks, will fix that.

Posts: 199
Joined: Wed Nov 09, 2011 5:35 pm
Location: Victoria

Re: OSE 11P V104

Postby Jervies » Mon Dec 05, 2016 10:18 pm

Not sure if it just a moddified adx issue or its on originals aswell but ve trace doesnt leave 20kpa colum?
Also the historgram table res is different to the histogram excel document lol.
Used 11p a few times now it works well. Have a 7000rpm spark cut

User avatar
Posts: 4988
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: OSE 11P V104

Postby VL400 » Tue Dec 06, 2016 5:35 pm

The VE tracing issue is due to baro compensated MAP being used for the VE table - this is the term the ECU is using for its lookup so is more accurate. If you use a ADX that is not for 11P V104 it will likely not work correctly. If one of the ADXs in the included 11P zip does not work can you let me know which so it can be fixed.

For the excel spreadsheet you can change the the ADX histograms to suit anything you would like. Or add new ones to do new and different things. Whats in the ADX is just a starting point and wont support every spreadsheet on this site.

PreviousNext

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 2 guests