VY XDF

For discussion and distribution of custom code and hacks
Post Reply
0081(2)
Posts: 149
Joined: Wed Oct 31, 2012 6:59 pm
cars: VY commodore supercharged V6
Location: Sydney

VY XDF

Post by 0081(2) »

I have been tuning the DFCO and Lean cruise lately and in the VY_V6_$060A_Enhanced_V1.0xdf the Lean Cruise - Time Delay After Idle Vs Intake Temp table has the table like this Deg C/Seconds 8/140.00 32/140.00 56/450.00 80/900.00 104/1800.00
I changed these down to 45 seconds and went for a drive but i think it was kicking in after only 4.5 seconds, Just wondering if their might be a error in the XDF and its not 45 sec but 4.5 sec which would make a bit more scene.


One other thing the Burst Knock - Coolant Threshold is reading 151.25 in my bin and when i do a compare bin to my original bin it also reads 151.25 Which i didn't think would be correct.
immortality
Posts: 3416
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: VY XDF

Post by immortality »

I thought burst knock was only enabled for the supercharged engines?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VY XDF

Post by The1 »

Lean cruise should be correct, it is time delay after IDLE, so if your already crusing along and go out of lean cruise then all conditions are met it will pretty much go straight back into lean cruise. If you come to a full stop, then starting driving upto cruise speed it should be 45 seconds after you left the stop position.

Yes burst knock is correct, it is disabled on flash pcm's from the factory.
0081(2)
Posts: 149
Joined: Wed Oct 31, 2012 6:59 pm
cars: VY commodore supercharged V6
Location: Sydney

Re: VY XDF

Post by 0081(2) »

Ah that clears it up then.

Thanks The1
Post Reply