12P VE learn or BLM is the question
-
- Posts: 1831
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
12P VE learn or BLM is the question
After playing around for some time to get the BLM to work I discovered on the forum that it won't work if the VE learn is on. The question I have is after the logging and tuning has been finished should I turn off VE learn and BLM on or just leave it.
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 12P VE learn or BLM is the question
After VE learn has done your fine tuning, turn it off and enable closed loop and let BLM take care of it like factory.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 1831
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: 12P VE learn or BLM is the question
That's what I thought but it still won't go into BLM. Looks like I need to learn a bit more.
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 12P VE learn or BLM is the question
do you get cross counts with the NB?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 12P VE learn or BLM is the question
theres a few other settings too, needs to be over a certain coolant temp etc .... but yeah provided your targeting 14.7 and the o2 sensor is working normally then it should work.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread