Wideband calibration for 12P and 11P

For discussion and distribution of custom code and hacks
Post Reply
Charlescrown
Posts: 1831
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Wideband calibration for 12P and 11P

Post by Charlescrown »

I was doing some logging today and I thought my wideband was spot-on. I noticed it's not. The logger was displaying a different reading to my Innovate wideband but not all the time. Is there a reason for this or do I need to adjust something? I have calibrated the wideband as per the manufacturers recommended procedure.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Wideband calibration for 12P and 11P

Post by Dylan »

Wideband 0 5 volt scalers might need adjusting.
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: Wideband calibration for 12P and 11P

Post by vlad01 »

There is a pull-up resistor too that can be removed to fix the offset. But I just use the 0v and 5v scalars to correct it within the resolution of the ecu ADC.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Post Reply