Hi is there any base bins to use to get up an going with a 186 with turbo basic standard type engine using vk inlet & injectors small t3 type turbo,
still chasing delco & wiring from camira. and what else is needed for real time tuning or recommend software/hardware , I have a eprom burner already for making a copy once tuning is done
Thanks
Delco on holden 186 with injection turbo
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Delco on holden 186 with injection turbo
If you havnt, have a read of the guides in the FAQ (see link near top right).
Also see the wiring digram and docs in the 12P download packge, and other factory information in the docs area.
If your having trouble with the camira wiring, try N13 Pulsar.
Also see the wiring digram and docs in the 12P download packge, and other factory information in the docs area.
If your having trouble with the camira wiring, try N13 Pulsar.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Delco on holden 186 with injection turbo
have a read here for how to convert a holden 6 to delco .... https://pcmhacking.net/forums/viewtopic.php?f=15&t=4
also the tuning guide links are in my signature, they show how to setup for boost, and you can get a 202 efi tune to get you started from the $12P custom tunes section, or create your own from a v6 one if you like.
keep in mind a 186 will be on the rich side with a 202 tune, and probably really needs injector rate offset to suit the capacity difference.
also the tuning guide links are in my signature, they show how to setup for boost, and you can get a 202 efi tune to get you started from the $12P custom tunes section, or create your own from a v6 one if you like.
keep in mind a 186 will be on the rich side with a 202 tune, and probably really needs injector rate offset to suit the capacity difference.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread