Generator Idle
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Generator Idle
if my calculations are correct its 75Hz 12V square wave to the cruise control and switch to the tach signal once enabled and then it should drive the engine up to 1500 and take over from there.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
actually that sounds alright ... i will hit the wreckers tomorrow and see if i can find one ....
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Generator Idle
Get one from a VS since they are the older larger type like those in VN to VR and I know for a fact how they work and respond. I don't know how well the later small delphi units work, as with anything with these cars the older stuff is generally less restrained and more aggressive.
I reckon it should work well as the cruise control will pull the engine to high loads quick if the generator is loaded up a lot.
I reckon it should work well as the cruise control will pull the engine to high loads quick if the generator is loaded up a lot.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
it must be able to be used by simple minded people ... if ur married u know what i mean ...
1 button marked "ARGUMENT"..... will do..!
1 button marked "ARGUMENT"..... will do..!
Re: Generator Idle
So people who are, or got, married are simple minded. As Aleksandr the meerkat says "simples".Charles S wrote:it must be able to be used by simple minded people ... if ur married u know what i mean ...
1 button marked "ARGUMENT"..... will do..!
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
what is the tacho from the DFI...? 3 pulses/rev..?
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Generator Idle
Yes I think so.Charles S wrote:what is the tacho from the DFI...? 3 pulses/rev..?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
i have got hold of the complete cruise control , wiring harness , stick ... ETC... and PCM with brown and tan connectors .. i think from VY V6 ..
does anyone have a wiring diagram for VY PCM ... with connector pins and wire colours ...
i can't find a complete drawing anywhere .... !! thank's ...
does anyone have a wiring diagram for VY PCM ... with connector pins and wire colours ...
i can't find a complete drawing anywhere .... !! thank's ...
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
could anyone please tell me which pin on the DTCF 16269238 PCM is diag test (C9..???) , also CEL .... ??
i have sussed cruise control and nearly everything else....
Thank's ............
i have sussed cruise control and nearly everything else....
Thank's ............
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generator Idle
Have a look in this thread here. The images are easier to read than the PDFs. viewtopic.php?f=32&t=2272
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396