Generator Idle
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
just a stupid thought ... how about if the iac output was driving a stepper motor on the butterfly...?
faster response and allow wot...
faster response and allow wot...
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Generator Idle
that's not a bad idea worth a try I guess.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
im having a problem with vats error and $51 enhanced bin... im not running a bcm but pcm has vats error if vats is disabled or not wit TPrt...
is there something im doing wrong..?
is there something im doing wrong..?
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generator Idle
Maybe, post up your bin? Did you do a bin write once to get the enhanced code on there? Vats disables injectors so if its running it must not be active. Did you choose fix checksum after writing? That should sort the code 51.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
where is fix checksum in tunerpro rt..?
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generator Idle
When you flash a VY computer with the OSE flashtool it will ask you if you want to fix the checksum, and you pick yes.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
im using a 16199728 pcm(pink and blue conns)... im erasing and programming 27c010's .... tprt seems to correct the sum on it's own every time i reload the bin...
have i missed something...? i have CKUL modified and running @1500rev's ... , i am trying to change to $51 enhanced for the rt tuning and dash etc...
i have comms working... da connected and data happening but no injectors.... pretty sure its DTC 31 and 41 problems...
tis all new to me...1st time i have used TPRT... i probibally missed something...
have i missed something...? i have CKUL modified and running @1500rev's ... , i am trying to change to $51 enhanced for the rt tuning and dash etc...
i have comms working... da connected and data happening but no injectors.... pretty sure its DTC 31 and 41 problems...
tis all new to me...1st time i have used TPRT... i probibally missed something...
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
GOT IT..! thank's antus..
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Generator Idle
Sorry yeah I was referring to the VX/VY non-SC flash pcm (service number 09356445) with the tan and brown connectors, not the memcal one you are using.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 43
- Joined: Sun May 10, 2015 11:00 am
- cars: 68 Chev Impala.. 327
69 Dodge Phoenix.. 383
64 Chevelle Ute.. 283
V6 VY 3.8L 20KW Generator Project
Re: Generator Idle
any ideas regarding WIN10 / WIN7 tunerproRT 9017 error "api-ms-win-crt-stdio-i1-1-0.dll" missing ....