$12P Can't connect to 808 ECM.

For discussion and distribution of custom code and hacks
Posts: 145
Joined: Mon Dec 12, 2016 11:27 am

Re: $12P Can't connect to 808 ECM.

Postby L67PSI » Sat Apr 22, 2017 5:59 pm

DS1245Y chip
Attachments
ds1245y.JPG

Posts: 145
Joined: Mon Dec 12, 2016 11:27 am

Re: $12P Can't connect to 808 ECM.

Postby L67PSI » Sat Apr 22, 2017 6:02 pm

May have found the problem. ECM could be faulty. Took out NVRAM board and fitted stock memcal and fans still come on.

Fitted stock memcal to spare ECM and no fans and engine starts & runs smooth.

Posts: 145
Joined: Mon Dec 12, 2016 11:27 am

Re: $12P Can't connect to 808 ECM.

Postby L67PSI » Sat Apr 22, 2017 7:59 pm

Ok, put NVRAM board into spare ECM and fires straight up, no fans or CEL. Def a bad / faulty ECM.

Now to re-solder USB comms onto spare.

Will post back with results.

Posts: 3171
Joined: Mon Aug 02, 2010 6:35 pm

Re: $12P Can't connect to 808 ECM.

Postby Dylan » Sat Apr 22, 2017 8:29 pm

That's good to find the problem at least

Posts: 145
Joined: Mon Dec 12, 2016 11:27 am

Re: $12P Can't connect to 808 ECM.

Postby L67PSI » Sat Apr 22, 2017 11:13 pm

All fixed.

Soldered in USB comms board & write enable wire, now connects with Flash Tool & TunerPro plugin. Tested with writing bin and get bin functions. All worked with no errors.

Not sure what happened to the old ECM then?? As it did power on and blue LED on NVRAM was active.

Thanks to everyone for assistance. :thumbup:

Site Admin
User avatar
Posts: 5709
Joined: Sat Feb 28, 2009 8:34 pm

Re: $12P Can't connect to 808 ECM.

Postby antus » Sun Apr 23, 2017 1:54 am

Cool. For reference thats a week 48 of 2011 nvram. They state they should last 10 years but ive seen trouble in 7 worst case/worse conditions. Interesting genuine sticker but its good to know whats what i guess. Glad you found the problem!
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 145
Joined: Mon Dec 12, 2016 11:27 am

Re: $12P Can't connect to 808 ECM.

Postby L67PSI » Sun Apr 23, 2017 9:55 am

I had a fake ds1245y so labelled the good genuine one.

Thanks

Previous

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 4 guests