Ose 12p flex output

For discussion and distribution of custom code and hacks
Post Reply
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Ose 12p flex output

Post by Wade »

I'd like to use a flex output to activate the electronic kickdown function on a th400 auto. The way it functions normally is either through an accelerator pedal mounted switch or throttlebody mounted micro switch that's activated at wot. Can anyone confirm that I've actually set it properly. Will post the bin and xdf
Attachments
FLEX OUTPUT OSE12P V112 - 1,2 and 3 bar.xdf
(407.17 KiB) Downloaded 345 times
FLEX OUTPUT OSE $12P V112 BLCF V8.BIN
(32 KiB) Downloaded 383 times
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Ose 12p flex output

Post by Holden202T »

the table layout looks ok, but I would check your flashtool settings, i'd set the tick box for digital on/off (relay) and run it through a relay that's powered from igniton for safety.

you might find you can even lower the tps % that it activates to improve response, ie. at lower revs kick down at 50-70% might be better and less aggressive.....
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: Ose 12p flex output

Post by Wade »

Thanks mate. I was thinking about playing with the table once it's set up.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Ose 12p flex output

Post by Holden202T »

yeah and that side of it is just trial and error and "nice to have" how you have it will pretty much mimic the old style kick down at least.
Post Reply