NVRAM problems
24 posts
• Page 3 of 3 • 1, 2, 3
Re: NVRAM problems
ok im not comfortable removing the chip. cant i just use the adapter i have for the memcals?
Re: NVRAM problems
No, the pins are different, if you do it yourself you'll need to have a go at it. I'll contact you via PM with options.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396
Re: NVRAM problems
ok so i carefully pried the nvram from the board and chucked it in my new eprom burner,
all is good, i set the jumper to read only installed in car, it connected right away,
thanks for the help,
Just so im clear, the jumper was set as per the photo i uploaded when i received it
thanks for the help,
all is good, i set the jumper to read only installed in car, it connected right away,
thanks for the help,
Just so im clear, the jumper was set as per the photo i uploaded when i received it
thanks for the help,
Re: NVRAM problems
dusto wrote:Just so im clear, the jumper was set as per the photo i uploaded when i received it
Ok, no worries. They normally ship with the RW jumper unset. This one must have slipped though. Im glad you got it sorted out.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396
24 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 5 guests