NVRAM problems
-
- Posts: 109
- Joined: Sun Mar 13, 2016 4:04 pm
- cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike
Re: NVRAM problems
ok im not comfortable removing the chip. cant i just use the adapter i have for the memcals?
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: NVRAM problems
No, the pins are different, if you do it yourself you'll need to have a go at it. I'll contact you via PM with options.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 109
- Joined: Sun Mar 13, 2016 4:04 pm
- cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike
Re: NVRAM problems
ok so i carefully pried the nvram from the board and chucked it in my new eprom burner,
all is good, i set the jumper to read only installed in car, it connected right away,
thanks for the help,
Just so im clear, the jumper was set as per the photo i uploaded when i received it
thanks for the help,
all is good, i set the jumper to read only installed in car, it connected right away,
thanks for the help,
Just so im clear, the jumper was set as per the photo i uploaded when i received it
thanks for the help,
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: NVRAM problems
Ok, no worries. They normally ship with the RW jumper unset. This one must have slipped though. Im glad you got it sorted out.dusto wrote:Just so im clear, the jumper was set as per the photo i uploaded when i received it
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396