injecting fuel pre blower tunning

For discussion and distribution of custom code and hacks
Posts: 109
Joined: Sun Mar 13, 2016 4:04 pm

injecting fuel pre blower tunning

Postby dusto » Fri Feb 09, 2018 4:15 pm

Hi all,

just like to say thanks to all involved in making the tools for the delco tunning and the wealth of info it really is a good forum

ok so now for my questions

i have a L67 running on e85 12psi pulley, looking at water injection pre blower, then i started thinking i have wet nitrous foggers and solinoids
so i though maybe use a fogger with small fuel jet spraying into the ellbow, fuel would be e85,
my problem is now going to be tunning the bloody thing when the fogger fires up with all the extra fuel, if i ref of the maff to switch the solenoid on will the point where my tune changes stay constant or am i likely to run into issues with leanouts and over rich?

hope this kinda makes sense,

User avatar
Posts: 4986
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: injecting fuel pre blower tunning

Postby VL400 » Fri Feb 09, 2018 10:04 pm

Port injecting E85 pretty much does the cooling for you, sounds like a headache for no real gain at only 12 PSI.

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 2 guests