injecting fuel pre blower tunning

For discussion and distribution of custom code and hacks
Post Reply
dusto
Posts: 109
Joined: Sun Mar 13, 2016 4:04 pm
cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike

injecting fuel pre blower tunning

Post by dusto »

Hi all,

just like to say thanks to all involved in making the tools for the delco tunning and the wealth of info it really is a good forum

ok so now for my questions

i have a L67 running on e85 12psi pulley, looking at water injection pre blower, then i started thinking i have wet nitrous foggers and solinoids
so i though maybe use a fogger with small fuel jet spraying into the ellbow, fuel would be e85,
my problem is now going to be tunning the bloody thing when the fogger fires up with all the extra fuel, if i ref of the maff to switch the solenoid on will the point where my tune changes stay constant or am i likely to run into issues with leanouts and over rich?

hope this kinda makes sense,
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: injecting fuel pre blower tunning

Post by VL400 »

Port injecting E85 pretty much does the cooling for you, sounds like a headache for no real gain at only 12 PSI.
Post Reply