Real Time Modded Factory Bins

For discussion and distribution of custom code and hacks
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

Updated the first post, has been tested and is working fine.
casagoya
Posts: 20
Joined: Mon Jan 25, 2010 7:21 pm
cars: VT Commodore Ecotech V6

Re: Real Time Modded Factory Bins

Post by casagoya »

I have a VT V6 Ecotec series I which uses the $A5C variant in the original factory memcal.

If I replace my memcal with an nvram loaded with the suggested bin ($A5G 3.8L Auto 16233396 ECU Series II Update, ends 04/2000) what will happen?
Will the car run? better? worse? will the other modules on the bus (BCM etc) recognise the upgraded PCM?
thanks

Tom
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

It should run pretty much the same (I dont think there were changes in the VT that meant an early release had to be used) and all other devices will still work fine (they wont know any different).

If it does require A5C then I will mod one of them and you can test it :thumbup:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Real Time Modded Factory Bins

Post by delcowizzid »

vt s1 running s2 tune normally wakes them up a bit should be fine
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
casagoya
Posts: 20
Joined: Mon Jan 25, 2010 7:21 pm
cars: VT Commodore Ecotech V6

Re: Real Time Modded Factory Bins

Post by casagoya »

Thank you.

I guess its time I finally bought the NVRAM and USB comms devices.

Are they still available?
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

The NVRAM is available now but the USB comms have a short wait - I would expect them to be ready by the end of next week.
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

Re: Real Time Modded Factory Bins

Post by turbov8 »

hey guys
ive modified my adx and used the injector voltage for my Wideband. seems to be all setup but i am having problems finding the voltage monitor line.. would D16 be the pinout i need for the wideband??
thanks
btw VR V8 Auto
tunerpro.jpg
tunerpro.jpg (98.37 KiB) Viewed 15186 times
Last edited by turbov8 on Tue Nov 30, 2010 6:42 pm, edited 1 time in total.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Real Time Modded Factory Bins

Post by delcowizzid »

dont think that trick works on vr only ecotec vs
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

Re: Real Time Modded Factory Bins

Post by turbov8 »

i think it was mentioned it works for VS V8 Auto
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

It does with a modified bin, have added it to the first post of this thread. Pin D7 is the feedback line.
Post Reply