Real Time Modded Factory Bins

For discussion and distribution of custom code and hacks
User avatar
charlay86
Posts: 584
Joined: Thu Sep 17, 2009 2:00 pm
cars: VT S1 SS (L67)
Location: Perth, WA

Re: Real Time Modded Factory Bins

Post by charlay86 »

I guess the increased delay also allows more time for the exhaust gasses to mix, which would average short transient rich/lean conditions to some degree...
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

This topic extends far beyond just transport delay! There is a fair bit of debate as to how much difference the cat makes, but the way I see it is the cat stores and releases oxygen as part of its conversion process, the wideband sensor reads oxygen content. If you also think about new vehicles with oxy sensors before and after the cats, the rear O2 sensors measure cat efficiency by seeing how the cat dampens the rich/lean swings of the closed loop process. So aside from the reduced speed of the AFR reading there may be some skewing of the actual AFR. I would like to see some logging done with a wideband before and after the cat, would be a very interesting comparison of AFR.
5point7
Posts: 4
Joined: Tue Jul 06, 2010 12:38 am
cars: 2 x hq monaro's
5.7 VY Calais gen 3
datto1200 ute
vt Berlina V6 sedan
ke70 corolla in wait

Re: Real Time Modded Factory Bins

Post by 5point7 »

my 2 cents...... the hotter the sensor the more accurate, condensation kills em, and a quicker real reading on warm up (emissions - hence the heater).
User avatar
darcy
Posts: 120
Joined: Fri May 22, 2009 10:28 am

Re: Real Time Modded Factory Bins

Post by darcy »

VL400 wrote: VR V6 Auto
Bin:
BMZA_mod.zip
ADX: Download the VR $11 TP5 ADX from here
XDF: https://pcmhacking.net/forums/viewtopic.php?f=7&t=634
Quick question VL,

Is the code in here any different/better than what's in OSE$11S beta that I'm using atm?

Cheers
darcy
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Real Time Modded Factory Bins

Post by Holden202T »

this is 100% factory BMZA tune with only changes added to allow you to write to it in realtime.
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

The difference is the 11S code your running has the write code added in as a new ALDL mode rather than patched in like these so it replaces an existing mode. Wont notice any difference in the day to day running as your using a BMZA cal anyway.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Real Time Modded Factory Bins

Post by delcowizzid »

might be time to test vt v8 auto setup mate if you looking for another tester is there adx etc for it i have the xdf of yodas for version c bin going to buy a connection board so its easyier allready have nvram one ready to go
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

Emailed you the bin and some info :thumbup:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Real Time Modded Factory Bins

Post by delcowizzid »

cool cheers mate
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
js1973
Posts: 58
Joined: Fri Nov 19, 2010 12:23 pm
cars: wh statesman

Re: Real Time Modded Factory Bins

Post by js1973 »

Can i test the vt v6 auto live tuning i made up a a board using the ds1245y
Post Reply