Real Time Modded Factory Bins

For discussion and distribution of custom code and hacks
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

Re: Real Time Modded Factory Bins

Post by turbov8 »

what a guy!!
cheers
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

One thing to be aware of is its using a 0-25.5v input so the resolution aint great when using a 0-5v output from the wideband (WIth it set for 10-20 AFR you wont get better than 0.2 AFR resolution on the reading).

If your wideband analog output is configurable then maybe knock the range down to what you expect to need to for tuning say 11-16 AFR. This will give you 0.1 AFR resolution.
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

Re: Real Time Modded Factory Bins

Post by turbov8 »

just confused about the input for the wideband
D7 looks like oxy sensor input??
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Real Time Modded Factory Bins

Post by VL400 »

VR V8 Auto is D7 for inj feedback, I think your looking at the manual diagram.
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

Re: Real Time Modded Factory Bins

Post by turbov8 »

i must be!! damn been labeled wrong
cheers
User avatar
Holden202T
Posts: 10308
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Real Time Modded Factory Bins

Post by Holden202T »

yeah vr vs v8 auto are d7 for injector line ... if you want to test it, touch it to earth and you'll blow the injector fuse ;)
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

Re: Real Time Modded Factory Bins

Post by turbov8 »

Holden202 wrote:yeah vr vs v8 auto are d7 for injector line ... if you want to test it, touch it to earth and you'll blow the injector fuse ;)
theres no need. i trust u guys. the things that have been accomplished by members of this site is amazing!!!!
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: Real Time Modded Factory Bins

Post by krusty »

Regarding the first post in this thread........

The below bin is available for download and is labelled as a VY s/c/ HSV tune which is DLTK to my knowledge. The XDF suggested is $A5K which is VT V6 and loads up fine in TP.

Question is, where did this bin come from as I'm under the impression it is modded and isn't a factory bin. I wouldn't mind writing something off to try in my VY L67.

VY S/C
Bin:
DDRJ_mod.zip
VY V6 S/C, XU6. A5K xdf is needed
(46.68 KiB)
User avatar
antus
Site Admin
Posts: 8228
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Real Time Modded Factory Bins

Post by antus »

Yeah DDRJ looks like the vx s/c HSV variant which is why VL400 picked that one to do. As I understand it it will work on a VY. The s/c code is still based on the VT for vx and vy and runs from a memcal (not the vx/vy flash pcm). These bins are the factory ones, write code patched in to them to them to add the realtime functionality when running from NVRAM.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: Real Time Modded Factory Bins

Post by The1 »

Putting a wideband in a VS V6 Auto here, using NVRAM for realtime tuning and have done the mod with pin B12 for wideband 0-5v feedback, it's logging fine in Tunerpro but car wont run, just starts then stalls basicly, from looking at different wiring diagrams it seems that pin B12 supplys the DFI module as well? Or am i miss reading something?
Post Reply