LS1 Boost OS - Development
Re: LS1 Boost OS - Development
Version 3.0 is live on my Patreon. I know I'll never recoup all of time I've spent on this, but I figured I would try and limit the amount of people using it in case there were issues with it.
There are a couple difficulty's with using it as PCM Hammer Version 21 doesn't like the new OSID so Version 20 must be used.
Also Universal Patcher has problems for the same reason, so hopefully that can be updated to allow segment swaps between my custom OS and standard 12587603 segments.
There are a couple difficulty's with using it as PCM Hammer Version 21 doesn't like the new OSID so Version 20 must be used.
Also Universal Patcher has problems for the same reason, so hopefully that can be updated to allow segment swaps between my custom OS and standard 12587603 segments.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: LS1 Boost OS - Development
Sorry I should have spent more time before posting my findings posted above which are probably incorrect.bubba2533 wrote:I'm not sure what you mean by not seeing any boost. Can you explain what you are doing?kojab wrote:Have a problem with the 3 BAR "Open Loop EQ'' table. It is not seeing any boost. Tried "slowtahoe's" Custom 2 BAR bin on my test bench and it seems to have the same problem.
22/09/2022
Going to put the 3 BAR Open Loop EQ table into RTLS1 and do a few logs on the road and see what it's doing. Should have done this before as bench testing has it's limits.
Getting close to 20 PSI boost now so this Open Loop EQ table is vital. Will report back.
27/10/2022
3 BAR "Open Loop EQ'' table working fine. Thank you again Bubba for getting your Boost OSs to run with the RTLS1.
-
- Posts: 35
- Joined: Thu Apr 28, 2022 5:49 am
- cars: 1984 Volvo 244
Re: LS1 Boost OS - Development
Subscribed on Patreon. Thanks for all the hard work!
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: LS1 Boost OS - Development
Also subscribed!
Re: LS1 Boost OS - Development
Broke4speed wrote:Subscribed on Patreon. Thanks for all the hard work! :)
Thanks a lot! It makes me feel like all that time I put in was worth it.hsv08 wrote:Also subscribed!
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: LS1 Boost OS - Development
I haven't got my setup running successfully yet, but with some time I'm.sure I will. I just love the direction it's going and the functions it makes available. Great workbubba2533 wrote:Broke4speed wrote:Subscribed on Patreon. Thanks for all the hard work!Thanks a lot! It makes me feel like all that time I put in was worth it.hsv08 wrote:Also subscribed!
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: LS1 Boost OS - Development
So i am trying to edit a 156 bin file, but it doesn't want to save after the fist edit. I feel there is a checksumming issue or something. Anybody able to help? Been hanging out to try the Boost OS but i can seem to edit the base file and then save with the XDF im using to even get to the stage of using the patched XDF.
Thats the XDF.
I spent 3 hours today editing only to get to the stage where it failed to save.
also wont save with the Boost 2.1 XDF.
Have added the .dll files to all locations of tunerpro
Thats the XDF.
I spent 3 hours today editing only to get to the stage where it failed to save.
also wont save with the Boost 2.1 XDF.
Have added the .dll files to all locations of tunerpro
Re: LS1 Boost OS - Development
Attach the bin file you are using as well.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: LS1 Boost OS - Development
Will do tonight.
I'm using a file from on here, open with HPTuner, swap all the calibration data from a good tuned file I have for our cars here. Convert back to a bin file, open back up with Tunerpro, and try to save any changes made with tunerpro and it fails to save. I wonder if HPTuner is injecting code somewhere and screwing it as a bin file?
I'm using a file from on here, open with HPTuner, swap all the calibration data from a good tuned file I have for our cars here. Convert back to a bin file, open back up with Tunerpro, and try to save any changes made with tunerpro and it fails to save. I wonder if HPTuner is injecting code somewhere and screwing it as a bin file?
Re: LS1 Boost OS - Development
i would try and isolate just making changes to a standard bin with tunerpro to make sure you have a working setup and then go from there.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.