LS1 Boost OS - Development
-
- Posts: 49
- Joined: Thu Jan 19, 2017 11:09 pm
- cars: 93 K1500, 5.7, 4L60E, 16168625 $E6
Re: LS1 Boost OS
It's 2002 os 12216125. Was used in flex fuel trucks in 02 and I believe 8.1L trucks as well. I'll post my 6125 bin that's currently in my truck. I could also pm you my xdf if you'd like. I'm hesitant to post it bc it's still a work in progress and I know of some errors. But does have most everything defined.
- Attachments
-
- MyTruck #8.6.2.bin
- (512 KiB) Downloaded 129 times
Re: LS1 Boost OS
Sorry if you already started swapping everything over, but I'm going to start porting all my code to 12216125 as well (It might be a week or so until it's done).Stokes1114 wrote:It's 2002 os 12216125. Was used in flex fuel trucks in 02 and I believe 8.1L trucks as well. I'll post my 6125 bin that's currently in my truck. I could also pm you my xdf if you'd like. I'm hesitant to post it bc it's still a work in progress and I know of some errors. But does have most everything defined.
If you are willing to test both that would be great.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
-
- Posts: 49
- Joined: Thu Jan 19, 2017 11:09 pm
- cars: 93 K1500, 5.7, 4L60E, 16168625 $E6
Re: LS1 Boost OS
No worries, I like messing with this stuff. I will definitely test both if it'll help. I know your getting rid of the EGR code, but will the PCM still read the EGR pintle pin for my wideband? If not I'll feed it to ac 5v.
Re: LS1 Boost OS
Yeah, I made sure because I use the EGR input for my wideband as well.Stokes1114 wrote:No worries, I like messing with this stuff. I will definitely test both if it'll help. I know your getting rid of the EGR code, but will the PCM still read the EGR pintle pin for my wideband? If not I'll feed it to ac 5v.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: LS1 Boost OS
PM Sent
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: LS1 Boost OS
Just to let others know who are watching this thread. I have bubba's "LS1 Boost OS" running in my vehical.
Hope to start the tuning process tomorrow. Have to decide on what logging program to use. Is there a TunerPro ADX for 12212156?
Could use HPTuners or EFILive.
Hope to start the tuning process tomorrow. Have to decide on what logging program to use. Is there a TunerPro ADX for 12212156?
Could use HPTuners or EFILive.
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: LS1 Boost OS
Just finished a log on the road using EFilive. Car has Wideband but EFILive not set up for it yet.
Engine started well and Idle was good. Engine coolant was 13*C. Drove round the block watching my onboard
Motec Wideband and with higher loads upto 100kpa was running too lean. Will get wideband installed on EFILive
or HPTuners before I do any more tuning/logs
You have done a good job bubba
Engine started well and Idle was good. Engine coolant was 13*C. Drove round the block watching my onboard
Motec Wideband and with higher loads upto 100kpa was running too lean. Will get wideband installed on EFILive
or HPTuners before I do any more tuning/logs
You have done a good job bubba
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: LS1 Boost OS
kojab wrote:Just finished a log on the road using EFilive. Car has Wideband but EFILive not set up for it yet.
Engine started well and Idle was good. Engine coolant was 13*C. Drove round the block watching my onboard
Motec Wideband and with higher loads upto 100kpa was running too lean. Will get wideband installed on EFILive
or HPTuners before I do any more tuning/logs
You have done a good job bubba
Good work. What turbo and injectors are you running?
I have HPT here so watching!
-
- Posts: 440
- Joined: Sun Mar 22, 2009 11:52 am
- cars: VT V6 supercharged in a corolla
- Location: Sydney
- Contact:
Re: LS1 Boost OS
Turbo from memory Garrett GT35R Dual Ball Bearing. Injectors 800cc Sard. My previous bin was a HPT COS which worried me as I wanted to go al least 25 psi boost and be in control of spark timing.
Now I can with bubba'"s "LS1 Boost OS.
Now I can with bubba'"s "LS1 Boost OS.
Re: LS1 Boost OS
Ok, I just discovered a mistake I made which prevents the EQ ratio table from exiting closed loop. It should be a fairly easy fix, but I'll test it on my truck to make sure it works.
I'll have to send you and updated file to flash once I fix it.kojab wrote:Turbo from memory Garrett GT35R Dual Ball Bearing. Injectors 800cc Sard. My previous bin was a HPT COS which worried me as I wanted to go al least 25 psi boost and be in control of spark timing.
Now I can with bubba'"s "LS1 Boost OS.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.