LS1 Boost OS - Development

For discussion and distribution of custom code and hacks
Post Reply
bubba2533
Posts: 498
Joined: Wed Apr 11, 2018 8:50 am
cars: 03 Chevy S10 Turbo V6

Re: LS1 Boost OS

Post by bubba2533 »

Stokes1114 wrote:I could test here in a week. I have a spare with 2156 already on it.
Ok! If you upload your tune (.bin) I can apply my patch and put in a base tune that should run and drive. It may not be perfect, but it would be good enough to test.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
kojab
Posts: 440
Joined: Sun Mar 22, 2009 11:52 am
cars: VT V6 supercharged in a corolla
Location: Sydney
Contact:

Re: LS1 Boost OS

Post by kojab »

I am currently using HPT 1260001 3bar bin. Spark table runs out as you know at 1.2 grams/cyl approx 8 PSI boost. Been trying to fudge it for a while.
My new engine was built to handle at least 25 pounds of boost.

I could transfer my current settings into a 12212156 OS bin and test your new "LS1 Boost OS" which would be very interesting.

I do all my own tuning and have been doing so for the last 30 years. I can give you feed back on my progress.
Stokes1114
Posts: 49
Joined: Thu Jan 19, 2017 11:09 pm
cars: 93 K1500, 5.7, 4L60E, 16168625 $E6

Re: LS1 Boost OS

Post by Stokes1114 »

I haven't transferred any of my settings to this bin from my 6125 yet. Just let me know if there's anything I shouldn't mess with.
Attachments
2002 Chevrolet Silverado Truck Auto LM7 5.3L (12212156).bin
(512 KiB) Downloaded 128 times
bubba2533
Posts: 498
Joined: Wed Apr 11, 2018 8:50 am
cars: 03 Chevy S10 Turbo V6

Re: LS1 Boost OS

Post by bubba2533 »

Stokes1114 wrote:I haven't transferred any of my settings to this bin from my 6125 yet. Just let me know if there's anything I shouldn't mess with.
If possible I would like to start with a bin that was confirmed running so that the number of changes are reduced. Also what is the 6125 OS?
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
kojab
Posts: 440
Joined: Sun Mar 22, 2009 11:52 am
cars: VT V6 supercharged in a corolla
Location: Sydney
Contact:

Re: LS1 Boost OS

Post by kojab »

I am still converting my HPT 1260001 3bar bin to 12212156. Spent a day yesterday getting most of it done. Hope to test it running on the road later today.
bubba2533
Posts: 498
Joined: Wed Apr 11, 2018 8:50 am
cars: 03 Chevy S10 Turbo V6

Re: LS1 Boost OS

Post by bubba2533 »

kojab wrote:I am still converting my HPT 1260001 3bar bin to 12212156. Spent a day yesterday getting most of it done. Hope to test it running on the road later today.
Ok perfect! Also what cable will you be using to flash the bin? HPTuners won't allow you to flash a raw bin file.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
kojab
Posts: 440
Joined: Sun Mar 22, 2009 11:52 am
cars: VT V6 supercharged in a corolla
Location: Sydney
Contact:

Re: LS1 Boost OS

Post by kojab »

bubba2533 wrote:
kojab wrote:I am still converting my HPT 1260001 3bar bin to 12212156. Spent a day yesterday getting most of it done. Hope to test it running on the road later today.
Ok perfect! Also what cable will you be using to flash the bin? HPTuners won't allow you to flash a raw bin file.
Probably EFILive a early version.

Should I send the modified 12212156 bin to you directly?
bubba2533
Posts: 498
Joined: Wed Apr 11, 2018 8:50 am
cars: 03 Chevy S10 Turbo V6

Re: LS1 Boost OS

Post by bubba2533 »

Yeah you can pm it to me when you’re done
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
Stokes1114
Posts: 49
Joined: Thu Jan 19, 2017 11:09 pm
cars: 93 K1500, 5.7, 4L60E, 16168625 $E6

Re: LS1 Boost OS

Post by Stokes1114 »

No problem I'll make my changes and test in the am. 6125 is the p01 flex fuel os. Came stock on my truck.
bubba2533
Posts: 498
Joined: Wed Apr 11, 2018 8:50 am
cars: 03 Chevy S10 Turbo V6

Re: LS1 Boost OS

Post by bubba2533 »

Year, make, model of your truck? And what’s the full OS ID? I might take a look at that OS so the P01 folks can have flex fuel.
LS1 Boost OS V3 Here. For feature suggestions post in here Development Thread. Support future development ->Patreon.
Post Reply