Any perth tuners able to help?

General Tuning Questions And Discussions
Posts: 10
Joined: Tue Aug 12, 2014 3:56 pm
Location: Perth

Any perth tuners able to help?

Postby Squiggs » Sat Aug 26, 2017 7:46 pm

Hi guys,

Im wonderimg if any perth tuners can help me, i jave a WB ute with a1991 L98/350tpi in it, the passkey (Vats/TDM) is locked out and im not having any luck with the old resistor bypass method.

Can vats be turned off on the ecm or do i need a bypass module ($120 off eBay)?

If it can be tirned off on the ecm is anyone able to rewrite the eprom for me? Ill remove it and get all the details for you, and pay you of course

Cheers
Powered by the Generals bent 8...

Posts: 2854
Joined: Mon Aug 02, 2010 6:35 pm

Re: Any perth tuners able to help?

Postby Dylan » Sat Aug 26, 2017 8:23 pm

Perth is the Delco capital of the world

User avatar
Posts: 4854
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Any perth tuners able to help?

Postby VL400 » Sun Aug 27, 2017 10:40 am

Can possibly help you out on disabling it if you can get some details on the memcal code.

Posts: 10
Joined: Tue Aug 12, 2014 3:56 pm
Location: Perth

Re: Any perth tuners able to help?

Postby Squiggs » Mon Sep 18, 2017 1:39 pm

Cheers. Pretty sure its a '730 ecm, will get the memcal code tonight. Is it possible to do the nvram swap on it and tune with Tunerpro? Just looking for options for future tuning. Pretty sure i have a spare ecm for it too.
Powered by the Generals bent 8...

Posts: 10
Joined: Tue Aug 12, 2014 3:56 pm
Location: Perth

Re: Any perth tuners able to help?

Postby Squiggs » Mon Sep 18, 2017 7:20 pm

Serv. No. 01227730

866251 M220522444


16176251

BAUB


Thats everything i can see written on the front, its jammed up under the dash but i have a spare 7730 ecm here too
Powered by the Generals bent 8...

Posts: 10
Joined: Tue Aug 12, 2014 3:56 pm
Location: Perth

Re: Any perth tuners able to help?

Postby Squiggs » Mon Sep 18, 2017 7:24 pm

Manage to get it out, memcal has

Delco
AUJP
1350
Powered by the Generals bent 8...

User avatar
Posts: 4086
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Any perth tuners able to help?

Postby delcowizzid » Mon Sep 18, 2017 8:51 pm

its $8D heres the xdf and bins and adx file thanks to the usa guys at gearheadefi.com http://www.gearhead-efi.com/Fuel-Inject ... rmation-8D
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 10
Joined: Tue Aug 12, 2014 3:56 pm
Location: Perth

Re: Any perth tuners able to help?

Postby Squiggs » Thu Oct 12, 2017 8:19 am

Cheers for the info Delcowizzid and Cheers VL400 for rewriting the memcal. It was a mission but i got it going (had to pull the dash out chasing wiring and found an old immobiliser up behind the cluster) but it starts, runs and dries now. Took it to busselton on the weekend for a run. Goes great, just need to replace leads,plugs etc as it stumbles when you really get up it.. shift kit it great but... snap ya neck on the 1-2 shift then holds second til 75-80 k's but still does 2300rpm at 110 in 4th.
Powered by the Generals bent 8...

Site Admin
User avatar
Posts: 4788
Joined: Sat Feb 28, 2009 8:34 pm

Re: Any perth tuners able to help?

Postby antus » Thu Oct 12, 2017 9:46 am

Thanks for letting us know :thumbup:
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 4854
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Any perth tuners able to help?

Postby VL400 » Sun Oct 15, 2017 6:09 am

Awesome to hear the WB is finally up and running!

Return to General Tuning Discussion

Who is online

Users browsing this forum: No registered users and 2 guests