VS 5.0 bin file help needed

General Tuning Questions And Discussions
Posts: 15
Joined: Sun Jul 09, 2017 6:21 am

VS 5.0 bin file help needed

Postby Carbie » Sat Apr 07, 2018 7:18 pm

Hello everyone, i have posted a bin that i need to modify slightly but i can't work out how to read it, i have tried all xdf's (tunerpro)
Can anyone point me in the right direction please?
Attachments
VS 5.0L Auto.BIN
(64 KiB) Downloaded 20 times

User avatar
Posts: 4569
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: VS 5.0 bin file help needed

Postby delcowizzid » Sat Apr 07, 2018 7:40 pm

its a kalmaker workshop bin can see wds30 in the bin about halfway down using a hex editor.dont think theres any w30 xdfs around
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 15
Joined: Sun Jul 09, 2017 6:21 am

Re: VS 5.0 bin file help needed

Postby Carbie » Sat Apr 07, 2018 8:28 pm

thanks Delco, is that the only way it can be read?

User avatar
Posts: 4569
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: VS 5.0 bin file help needed

Postby delcowizzid » Sat Apr 07, 2018 8:45 pm

What are you trying to change might be able to find a few tables
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 3079
Joined: Mon Aug 02, 2010 6:35 pm

Re: VS 5.0 bin file help needed

Postby Dylan » Sat Apr 07, 2018 8:48 pm

If you can make up a basic XDF based around the mods Delco I'll convert it to a 12P bin if that helps.

User avatar
Posts: 9491
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: VS 5.0 bin file help needed

Postby Holden202T » Sat Apr 07, 2018 9:05 pm

might be easier if someone has kalmaker can suck one the tables you want ?

Posts: 15
Joined: Sun Jul 09, 2017 6:21 am

Re: VS 5.0 bin file help needed

Postby Carbie » Sat Apr 07, 2018 9:33 pm

i need to delete dtc 24 but also want to check/adjust the timing map

Return to General Tuning Discussion

Who is online

Users browsing this forum: No registered users and 5 guests