I was having a look at Jaymes LS1 bin/xdf in Tunerpro and looking at the scalars- VATS and wanted to know what
the 0=serial and 1=PWM mean?
LS1 VATS info
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: LS1 VATS info
Early US models use a PWM signal for VATS - a square wave signal with varying pulse widths. This is what those super cheap eBay VATS removal modules bypass.
We use a serial data stream that is coded/linked to other modules (there is a PIM for ALDL to OBDII translation).
We use a serial data stream that is coded/linked to other modules (there is a PIM for ALDL to OBDII translation).
-
- Posts: 340
- Joined: Sat Mar 21, 2009 2:02 pm
- cars: VT S1 LS1 C/dore track car
HJ GTS Monaro Coupe
CV8 V2 S3
VE SSV
Re: LS1 VATS info
Ahhhh was that similar to the earlier "special" box with the resistor pack to bypass the key reader/slip ring?
Thanks VL,that explains it clearly.
Cheers
Thanks VL,that explains it clearly.
Cheers
Re: LS1 VATS info
Hi.. where i can find that xdf for ls1... ? Thanks