11P rev limit issues
Re: 11P rev limit issues
Could be onto to it there
these are my old ones viewtopic.php?f=31&t=5136&hilit=coil+test&start=50
fitted now are stock ones
these are my old ones viewtopic.php?f=31&t=5136&hilit=coil+test&start=50
fitted now are stock ones
According to chemistry, alcohol is a solution...
Re: 11P rev limit issues
Run some LS coils? Can be done off the stock DFI module Jayme done that once. Or go all out on a guru module from VL400.
Good excuse for an upgrade anyway I know the 5 litres love a good spark upgrade of any sort.
Good excuse for an upgrade anyway I know the 5 litres love a good spark upgrade of any sort.
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 11P rev limit issues
No, no spark issue. engine was running fine. When it hit the limit the engine was making full load on the dyno just the rpm hits a wall.
here is an easy test, run it up in 3rd gear.
here is an easy test, run it up in 3rd gear.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 11P rev limit issues
Dylan wrote:Run some LS coils? Can be done off the stock DFI module Jayme done that once. Or go all out on a guru module from VL400.
Good excuse for an upgrade anyway I know the 5 litres love a good spark upgrade of any sort.
I doubt it, its running pissy 10:1 comp and has lost sealing from use so the comp isn't that great anymore so it has to run on what its got.
They are genuine delco coils too, brand new.
With ignition problems there should be crackling, bucking etc.. this is just smooth but then a firm wall, like running into the dyno set limit.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 11P rev limit issues
See how he pulls out of the run at 4900. If the dyno is telling you to stop the run then there is a problem with the speed limit on the dyno.
- Attachments
-
- Capture.PNG (37.37 KiB) Viewed 5966 times
Last edited by vlad01 on Fri May 12, 2017 3:27 pm, edited 1 time in total.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 11P rev limit issues
Im not sure what your getting at, the section I linked prior shows it hits the limit at 5200 though. I agree with doing a pull in another gear to change the road speed the dyno sees.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 11P rev limit issues
yes but thats on load mode not graph mode like the one I have. They have independant settings and purposes on the dyno. The bit you showed is just on a load % to warm the car up, this one shows the graphing mode, ie. pull on the dyno that graphs the output.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 11P rev limit issues
Ahh ok, what time in the log shows the limit then?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: 11P rev limit issues
actual set limit or this annoying one?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: 11P rev limit issues
annoying one
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396