haltech tune on holden 355 t56 manual vs ute
Re: haltech tune on holden 355 t56 manual vs ute
I've tuned a couple similar on the Delco send me a copy if you can't zip it to post. I'll look up the software.
Re: haltech tune on holden 355 t56 manual vs ute
im trying to download a zip program, but its taking a while
Re: haltech tune on holden 355 t56 manual vs ute
What model injectors are they Bosch?
What's the fuel pressure at?
I've never seen a set of Bosch 42 injectors work hopefully yours do.
What's the fuel pressure at?
I've never seen a set of Bosch 42 injectors work hopefully yours do.
Re: haltech tune on holden 355 t56 manual vs ute
they are bosch 42lb green injectors, running 42psi
Re: haltech tune on holden 355 t56 manual vs ute
my e-mail is ben_williamson85@hotmail.com if u want to get it through there
Re: haltech tune on holden 355 t56 manual vs ute
ok guys here are the tune files
- Attachments
-
- barry 355 tune altered.zip
- i have started trying to smooth out a couple of the tables in this tune
- (13.51 KiB) Downloaded 260 times
-
- barry 355 tune.zip
- (13.07 KiB) Downloaded 262 times
-
- phils 355 ute final tune.zip
- (13.95 KiB) Downloaded 258 times
- krusty
- Posts: 570
- Joined: Wed Jan 27, 2010 9:45 pm
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: haltech tune on holden 355 t56 manual vs ute
Both tunes don't appear to have anything real silly going on with them. The one labelled "Phil" appears more well developed but the target AFR tables are a bit odd and targeting quite rich in low load areas, however much more sensible than the other one.
You could have something as simple as a blocked fuel filter causing lean fuel or the tunes have too much timing for the quite high compression ratio and it didn't show up on the dyno, vs now showing an issue on the street possibly.
I hope you have ARP rod bolts with a 7200rpm limiter lol
You could have something as simple as a blocked fuel filter causing lean fuel or the tunes have too much timing for the quite high compression ratio and it didn't show up on the dyno, vs now showing an issue on the street possibly.
I hope you have ARP rod bolts with a 7200rpm limiter lol
Re: haltech tune on holden 355 t56 manual vs ute
The problem i had with phils was it it was very rich all the time down low. Had lots of issues with cruise running in the low 10 afr and into the low 9 when touching the throttle
Re: haltech tune on holden 355 t56 manual vs ute
Phils tune was making 327hp. But it had 25lb injectors but tune was set to 19lb.
Barrys tune made 362hp and was fitted with the 42lb injectors and tune was set to suit
Barrys tune made 362hp and was fitted with the 42lb injectors and tune was set to suit
Re: haltech tune on holden 355 t56 manual vs ute
Did you ever go back to the dyno shop and ask for a touch up?