WB setup in adx

General Tuning Questions And Discussions
Post Reply
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

WB setup in adx

Post by Wade »

can someone please help and or walk me through setting up the adx for a Spartan WB. the calc ((20.00-10.00)/255*x)+10.00. b10. ive never set up an adx, and its all mumbo jumbo to be
Attachments
WADE VY_V6_SC_$07_Enhanced_v1.2d.adx
(138.97 KiB) Downloaded 254 times
WADE VY_V6_SC_$07_Enhanced_v1.2f.xdf
(293.57 KiB) Downloaded 264 times
WADE VY_V6_SC_$07_Enhanced_v1.2.bin
(128 KiB) Downloaded 253 times
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: WB setup in adx

Post by The1 »

assuming youve wired the analogue output to pin b10

open tunerpro, hit the edit adx button to the left of the connect button, then goto values and select Pin B10 Input, you can change the title to wideband if you want. then change range low to 10 and range high to 20, click conversion at the bottom then set the equation to what you have above and hit save, it should all read correctly now.
FXST02
Posts: 107
Joined: Thu Jul 12, 2012 8:42 pm
cars: VP V6 Auto sedan
Location: Perth WA

Re: WB setup in adx

Post by FXST02 »

Try this
Attachments
WADE VY_V6_SC_$07_Enhanced_v1.2e.adx
(138.97 KiB) Downloaded 301 times
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: WB setup in adx

Post by Wade »

thanks for the help guys. ive logged the car today, but still getting the readings with the wideband. doesn't really look right
Attachments
12.2.18 vy v6 turbo log.xdl
(100.96 KiB) Downloaded 257 times
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: WB setup in adx

Post by Wade »

the heater ground ive ground under the dash to the chassis. I might move it from there. everything else is hooked up as per instructions. linear output to b10, electronic ground and the led ground are grounded through the pcm from memory was a11 and 12 black and red wires. and the positive with 5amp fuse was run up to the cigarette lighter. simulated narrow band I folded up and sealed off as im running 2 bungs off the dump pipe, so only needed to set the 1 narrow band up in the tunes flags
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: WB setup in adx

Post by Wade »

Found the issue. The fuse holder was faulty. No power at the fuse but power going in
Attachments
450F6E92-B01F-4D41-BA47-74E2AEC45244.jpeg
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: WB setup in adx

Post by antus »

Thanks for letting us know, glad you found it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply