WB setup in adx
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
WB setup in adx
can someone please help and or walk me through setting up the adx for a Spartan WB. the calc ((20.00-10.00)/255*x)+10.00. b10. ive never set up an adx, and its all mumbo jumbo to be
- Attachments
-
- WADE VY_V6_SC_$07_Enhanced_v1.2d.adx
- (138.97 KiB) Downloaded 256 times
-
- WADE VY_V6_SC_$07_Enhanced_v1.2f.xdf
- (293.57 KiB) Downloaded 267 times
-
- WADE VY_V6_SC_$07_Enhanced_v1.2.bin
- (128 KiB) Downloaded 255 times
Re: WB setup in adx
assuming youve wired the analogue output to pin b10
open tunerpro, hit the edit adx button to the left of the connect button, then goto values and select Pin B10 Input, you can change the title to wideband if you want. then change range low to 10 and range high to 20, click conversion at the bottom then set the equation to what you have above and hit save, it should all read correctly now.
open tunerpro, hit the edit adx button to the left of the connect button, then goto values and select Pin B10 Input, you can change the title to wideband if you want. then change range low to 10 and range high to 20, click conversion at the bottom then set the equation to what you have above and hit save, it should all read correctly now.
Re: WB setup in adx
Try this
- Attachments
-
- WADE VY_V6_SC_$07_Enhanced_v1.2e.adx
- (138.97 KiB) Downloaded 302 times
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: WB setup in adx
thanks for the help guys. ive logged the car today, but still getting the readings with the wideband. doesn't really look right
- Attachments
-
- 12.2.18 vy v6 turbo log.xdl
- (100.96 KiB) Downloaded 260 times
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: WB setup in adx
the heater ground ive ground under the dash to the chassis. I might move it from there. everything else is hooked up as per instructions. linear output to b10, electronic ground and the led ground are grounded through the pcm from memory was a11 and 12 black and red wires. and the positive with 5amp fuse was run up to the cigarette lighter. simulated narrow band I folded up and sealed off as im running 2 bungs off the dump pipe, so only needed to set the 1 narrow band up in the tunes flags
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: WB setup in adx
Found the issue. The fuse holder was faulty. No power at the fuse but power going in
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: WB setup in adx
Thanks for letting us know, glad you found it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396