VX v6 flash based ecu question
-
- Posts: 66
- Joined: Thu Nov 14, 2013 9:44 pm
- cars: vs statesman
VX v6 flash based ecu question
Hey guys,
got a quick one in regards to flashing the enhanced code for the vx flash based pcm.
currently the pcm has got a factory tune on it. Ive got the bin downloaded multiple times with the vehicle identification details.
how would i go about flashing an enhanced BIN to the car while retaining these details? As far as ive read in the FAQ, the car wont start without this information.
Cheers
got a quick one in regards to flashing the enhanced code for the vx flash based pcm.
currently the pcm has got a factory tune on it. Ive got the bin downloaded multiple times with the vehicle identification details.
how would i go about flashing an enhanced BIN to the car while retaining these details? As far as ive read in the FAQ, the car wont start without this information.
Cheers
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VX v6 flash based ecu question
Good question... I think you'd need to copy the VIN, eeprom section, & the 2 security sections but I'm not 100% as I'm not sure if there's code changes before 4000 bytes as if there isn't then you can just do a write cal & will leave the things I mentioned as they are!
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: VX v6 flash based ecu question
Flash bin with vats off. Than if you want vats on you relink the bcm and pcm with a tech 2
-
- Posts: 66
- Joined: Thu Nov 14, 2013 9:44 pm
- cars: vs statesman
Re: VX v6 flash based ecu question
Thanks for your reply, so If I Just flashed it straight from pcmhacking with vats off that information doesn't matter?Wade wrote:Flash bin with vats off. Than if you want vats on you relink the bcm and pcm with a tech 2
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VX v6 flash based ecu question
gotta make sure the bin you use has eeprom data programmed as most of them have it cleared so then it won't run AFAIK
-
- Posts: 66
- Joined: Thu Nov 14, 2013 9:44 pm
- cars: vs statesman
Re: VX v6 flash based ecu question
As far as I know, previously used the vs enhanced tunes, the OS is included in these bins. Haven't had issues as of yet.VX L67 Getrag wrote:gotta make sure the bin you use has eeprom data programmed as most of them have it cleared so then it won't run AFAIK
The plan is to flash the entire bin to the VX, then obviously write cal as necessary from then on. But just wondering if it's just as simple as disabling vats and flashing it or is there any other security data needed to allow it to start.
-
- Posts: 288
- Joined: Wed Jul 01, 2009 7:18 pm
- cars: VY V6 Commodore ute.
VS V6 Commo sedan.
VT V6 powered 4x4 Hilux ute.
Re: VX v6 flash based ecu question
0081 Pete has done that but used a VY Flash pcm from a wrecker to clone his original PCM on to. That way if he has any issues with the Clone flash pcm ha always has the original as a back up.
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: VX v6 flash based ecu question
Yeah that’s what I did too. Found a vx pcm cloned it as my vy pcm than flashed enhanced code in
-
- Posts: 186
- Joined: Fri Jul 09, 2010 10:01 pm
- cars: VY s L67
Haines Hunter - not a car but still a toy
Re: VX v6 flash based ecu question
I think when you flash the enhanced code in at the end it asks about clearning somthing you can select no and it keeps your cars info but its been a quite a few years now since i flashed the enhanced code. The 1 should be able to confrim if that would work.
Currently i just run with vats off.
I have flashed mine probally over 250 times and not bricked it yet.
I have seen one bricked once by someone else and mine has for some reason locked up twice but a power cycle sorted that out
Currently i just run with vats off.
I have flashed mine probally over 250 times and not bricked it yet.
I have seen one bricked once by someone else and mine has for some reason locked up twice but a power cycle sorted that out