ose pluging fault

General Tuning Questions And Discussions
Post Reply
wiix360
Posts: 23
Joined: Tue Jan 09, 2018 7:48 pm
cars: Ford maverick Delco efi

ose pluging fault

Post by wiix360 »

Hey guys im having a problem with ose pluging constantly disconnecting and have to keep reconnecting every time i rev car or attempt to do alterations it drops out and its annoying me
User avatar
vlad01
Posts: 7780
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: ose pluging fault

Post by vlad01 »

That's interference from the ignition system. Can be caused by coil location (v8), or type of leads and or plugs used. Non resistor plugs are shocking in that regard.

It can also be caused by the type of USB cable used. I cheap non shielded one are more prone to interference. I good one will generally be thick (more braided shielding inside) and ferrite RFI suppressors near the ends, those cylindrical bits on the cable.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
wiix360
Posts: 23
Joined: Tue Jan 09, 2018 7:48 pm
cars: Ford maverick Delco efi

Re: ose pluging fault

Post by wiix360 »

yea im thinking plugs its got non resistor type fitted atm car was a carby now efi
Post Reply