Hi There
I have a program loaded onto a memcal in a 808 ecm and wondered if anyone would be able to get the info off it and load onto another memcal which could be later changed using tuner pro.
I’m located in Perth
Any help would be greatly appreciated
Tuning info
Re: Tuning info
Sorry guys
The original program is written using Kalmaker
The original program is written using Kalmaker
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Tuning info
Something like that is possible yes. I assume its sp3? Does the computer have a comms mod and can you talk to it from the pc? You can download the tune with oseplugin, compare it to a stock kalmaker tune, and then migrate the changes in to ose12p and run that on an ecm nvram. To get a bit of an idea take a look at the guides in the FAQ area, link near the top right of the screen. Thats not sp3 to 12p, but it should give you a bit of an idea about the tuning process which will help you understand what your going to to need to do, terminology etc.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396