Tuning Info

General Tuning Questions And Discussions
Posts: 711
Joined: Tue Jul 21, 2009 10:02 am

Tuning Info

Postby v6bucket » Mon Dec 16, 2019 10:29 am

I'm going through some logs of my car, chasing some timing alterations in the tune.
What should the "EST Params Torque Management RPM Threshold" "EST Params Torque Management Forced Advance" be set to?
The RPM is 6375 & the Advance is 5.98, these figures are probably from the bin that I used as a base. This ecu is only running the ignition at this point, no fuel.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---

Site Admin
User avatar
Posts: 6036
Joined: Sat Feb 28, 2009 8:34 pm

Re: Tuning Info

Postby antus » Mon Dec 16, 2019 12:54 pm

I dont know the answer, but it would help others if you mentioned the OS you are talking about
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 711
Joined: Tue Jul 21, 2009 10:02 am

Re: Tuning Info

Postby v6bucket » Mon Dec 16, 2019 10:49 pm

Sorry it's a 12P bin
V112Torana Alky3.13.bin
(32 KiB) Downloaded 11 times
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---

User avatar
Posts: 9889
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Tuning Info

Postby Holden202T » Tue Dec 17, 2019 11:42 am

i believe this is the rpm that torque management is enabled ... and above that RPM it will use that timing advance.

but i am not sure whether that is triggered be another sensor/input etc or purely rpm based.

User avatar
Posts: 5097
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Tuning Info

Postby delcowizzid » Tue Dec 17, 2019 11:44 am

It is only torque management for shifting from neutral or park into gear if I remember correct doesn't need changed
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 711
Joined: Tue Jul 21, 2009 10:02 am

Re: Tuning Info

Postby v6bucket » Wed Dec 18, 2019 11:45 am

Thanks for that. The engine feels a little flat compared to the dizzy & there is some difference in the commanded timing & what is being logged. So I will continue to look at.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---

User avatar
Posts: 5097
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: Tuning Info

Postby delcowizzid » Fri Dec 20, 2019 10:37 pm

Do you have a tps hooked up even if it's not on a shaft just taped in the loom. It was found that you get stuck in the idle spark table without one attached
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 711
Joined: Tue Jul 21, 2009 10:02 am

Re: Tuning Info

Postby v6bucket » Sat Dec 21, 2019 5:51 am

Yes, there is a TPS connected & working.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---

Return to General Tuning Discussion

Who is online

Users browsing this forum: No registered users and 2 guests