Hello Guys
2 Questions
Currently have a 27sf512 chip and wondering is it possible to burn a vr bin file onto it and use it in a 808 ecu?
I have access to a VR 5L Manuel ecu, can I use that ecu and a VN loom? Will be fitted to a VB commy
cheers guys
VR bin file into 808
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VR bin file into 808
$12 or 12P will be fine, $11 and 11P files will not work as the architectures of the PCM/ECUs are different to each other.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: VR bin file into 808
sweet so I can burn 12P tune onto the chip via stacking and it will work in the 808 ecu apart from the baud rate stuff
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VR bin file into 808
yes
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 1831
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: VR bin file into 808
You can just offset the program to 8000. That's all I do.
- antus
- Site Admin
- Posts: 8238
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VR bin file into 808
yeah it depends on the programmer, some cant do partial writes. when 'stacked' its only the second copy thats used. whats in the bottom half isnt relevant, it can be all 00, all FF, a second copy of the file, it just builds a file the same size as the chip that all programmers can handle.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7780
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VR bin file into 808
Charlescrown wrote:You can just offset the program to 8000. That's all I do.
That's what I do as well. Works a treat.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 1831
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: VR bin file into 808
I've done it hundreds of times and to be honest I have no idea how to stack a bin file.