First time user aldl kit
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: First time user aldl kit
You could join the low reading earth pin to the one next to it and see if it connects
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: First time user aldl kit
Do I have to make a jumper off the back of those pins?
What pins exactly?
What pins exactly?
Last edited by Pete30nz on Sun Jun 20, 2021 8:01 pm, edited 1 time in total.
Re: First time user aldl kit
I don't want to jump in out of turn here, so I'll let delcowizzid reply...
Re: First time user aldl kit
I feel like I've been thrown under a bus^.
OP, you're last post was directed to delcowizzid (before it was edited).
Now my post looks ridiculous.
I'm not changing it to suit you.
Thanks.
OP, you're last post was directed to delcowizzid (before it was edited).
Now my post looks ridiculous.
I'm not changing it to suit you.
Thanks.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: First time user aldl kit
Join the 2 aldl plug earth's can strip the insulation or just push in a jumper wire from behind to see if 1 missing earth is the issue
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: First time user aldl kit
Sorry my bad, thought I'd edit my message so it was neutral.'quipt4it wrote:I feel like I've been thrown under a bus^.
OP, you're last post was directed to delcowizzid (before it was edited).
Now my post looks ridiculous.
I'm not changing it to suit you.
Thanks.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: First time user aldl kit
I'll have to try this later on this evening.delcowizzid wrote:Join the 2 aldl plug earth's can strip the insulation or just push in a jumper wire from behind to see if 1 missing earth is the issue
If I'm to use a multi meter, what pin and pcm terminals would I test to check if the wire was damaged
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: First time user aldl kit
Just pulled up at work, battery volts reading with multi meter 12.81V'quipt4it wrote:Time to holler for a Marshall lol.Your battery looks cactus.
Check for a good continuity from pin no.5 to earth. Can the battery be that low and still start?
Double check the pos (+) to neg (-) on the battery (volts).
Terminal no.4 (ALDL) is also an earth.
That's a lot of fresh air in that img. haha
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: First time user aldl kit
Hi,
A happy day today. I've learnt I also have a faulty fractured wire. At some point I'll strip and repair the wire(s).
A happy day today. I've learnt I also have a faulty fractured wire. At some point I'll strip and repair the wire(s).
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: First time user aldl kit
Well you got there eventually.
USB cable?
USB cable?