Memcal VR V6 installed
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
Will I be able to over write that memcal I received recently?
It's a Moates adaptor with chip.
It's a Moates adaptor with chip.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Memcal VR V6 installed
Ose flashtool here viewtopic.php?f=3&t=82
Will be able to use your aldl cable and read out the tune
Will be able to use your aldl cable and read out the tune
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
Cheers Delcowizzid.
What will I need to be writing to a chip again. I've lost track of what I'd need to purchase.
Cheers
What will I need to be writing to a chip again. I've lost track of what I'd need to purchase.
Cheers
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Memcal VR V6 installed
ECM NVRAM
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Memcal VR V6 installed
ecm nvram are in short supply but should be some more hopefully in the next few weeks. it'd be worth just reading the tune to see what is without looking in to writing it back yet. You may be able to write something to the chip you have, but it depends on the type of chip. there are many options, you'll need to peel back the label to see what it is. you'll need to buy or source a programmer, and you'll need to know what you want to put on it. ecm nvram is to do real time tuning and build your own tune.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
Hi Team
Been away for the long weekend, sorry for the late reply.
I appreciate the input from you all.
I'm going to try and read the tune shortly, and if I remember correctly, i will use the ose flash tool to read it.
Hopefully I can with out to much hassle. To read the tune inside the VR at the moment, where it says what type of vehicle, do i have to put "VR" in this column?
Ok so ECM Nvram can do real time tuning. What does PCM Nvram get used for?
Edit: i found this - Pcm Nvram is for VS
Ecm Nvram is for VR
cheers
Pete
Been away for the long weekend, sorry for the late reply.
I appreciate the input from you all.
I'm going to try and read the tune shortly, and if I remember correctly, i will use the ose flash tool to read it.
Hopefully I can with out to much hassle. To read the tune inside the VR at the moment, where it says what type of vehicle, do i have to put "VR" in this column?
Ok so ECM Nvram can do real time tuning. What does PCM Nvram get used for?
Edit: i found this - Pcm Nvram is for VS
Ecm Nvram is for VR
cheers
Pete
Last edited by Pete30nz on Mon Oct 25, 2021 3:37 pm, edited 3 times in total.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
I'm currently looking at the thread: setting up the flash tool - viewtopic.php?f=3&t=82
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
I still have to riggle the factory aldl wires around..
This is as far as I've got tonight, photos attached.
This is as far as I've got tonight, photos attached.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
What should I do from here?
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Memcal VR V6 installed
OK it looks like you have clicked connect to ECU. Then all you do is click get bin. Once downloaded just give it a name and save it.
If your making changes and tuning you can just download get cal which is just the calibration side of the bin file.
If your making changes and tuning you can just download get cal which is just the calibration side of the bin file.