Hi,
Yes once i can get it to download, i will name and save it.
The photos in the last message was as fas as i could get. And it was taking about 5 minutes or more to get to each retry stage.
How long does it usually take to download the Bin?
There must be some thing I'm not doing 100% correct.
Any ideas?
Cheers
Pete
Memcal VR V6 installed
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Memcal VR V6 installed
I think it took around a minute to get the bin file. I'll have a look at the settings I am using and post back later today.
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Memcal VR V6 installed
Under user preferences I have to following settings
High speed coms read and write set to AUTO
Auto retries 5
General program options all ticked except for Flash PCM
ECM com port empty
Baud rate 8192
Wait for silence 50
Com retries 10
Com timeout 300
Device ID F4
BCM device BD
Heart beat 0x08.0x55.0xA3
Heartbeat timeout 2000
Tick disable chatter, ignore echo, silence on connect
Logger Mode ALDL
High speed coms read and write set to AUTO
Auto retries 5
General program options all ticked except for Flash PCM
ECM com port empty
Baud rate 8192
Wait for silence 50
Com retries 10
Com timeout 300
Device ID F4
BCM device BD
Heart beat 0x08.0x55.0xA3
Heartbeat timeout 2000
Tick disable chatter, ignore echo, silence on connect
Logger Mode ALDL
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
Hi
I'll try this later this morning, and post back.
Cheers for the info
Edit: photo attached of the setting I had the other day.
No time today, hopefully tomorrow
Pete
I'll try this later this morning, and post back.
Cheers for the info
Edit: photo attached of the setting I had the other day.
No time today, hopefully tomorrow
Pete
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Memcal VR V6 installed
Afternoon
i have just grabbed my Bin off the VR memcal ECM and saved it.
I'm unsure how to look at it? I'm guessing Tunerpro some how.
cheers
Pete
i have just grabbed my Bin off the VR memcal ECM and saved it.
I'm unsure how to look at it? I'm guessing Tunerpro some how.
cheers
Pete
- Attachments
-
- MyVRMemcalChipBin.bin
- (64 KiB) Downloaded 136 times