VXDiag VCX Nano

Programs / Tools / Scripts
Posts: 320
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: VXDiag VCX Nano

Postby In-Tech » Mon Apr 05, 2021 10:35 am

Gampy wrote:Must of had your beer goggles on ... :lol:

I've been known to resemble that remark :mrgreen:

Posts: 131
Joined: Tue Oct 25, 2011 7:47 pm
Location: Vic

Re: VXDiag VCX Nano

Postby jxx » Mon Apr 05, 2021 10:53 am

vs ss wrote:Gampy,I do t know if these are the photos you want but I have a couple of mine.


I can't tell from the pics, but does pin 9 goto unpopulated FB20 or FB21 thru a via and tracks?

Posts: 485
Joined: Thu Nov 03, 2011 7:57 pm
Location: perth wa

Re: VXDiag VCX Nano

Postby vs ss » Mon Apr 05, 2021 11:47 am

42FF48A7-3ADF-4A31-ABC8-FE6036923928.jpeg


I can't tell from the pics, but does pin 9 goto unpopulated FB20 or FB21 thru a via and tracks?[/quote]

No, it appears to have the pad for pin 9 to be soldered onto but has no tracks coming off it. On the opposite side of the board it only has one track off of pin 5 that goes through the board and terminates on the track you see in front of fb21.
I put another pic up that might help a bit better.

User avatar
Posts: 4456
Joined: Mon Jan 04, 2010 10:23 am

Re: VXDiag VCX Nano

Postby The1 » Tue Apr 06, 2021 3:50 pm

i probed pin9 it doesn't link to anything. The ST chip anyway doesn't seem to support uart.

User avatar
Posts: 2405
Joined: Thu May 17, 2012 8:53 pm
Location: WA

Re: VXDiag VCX Nano

Postby Tazzi » Wed Apr 07, 2021 12:48 pm

Yeah, I double checked again now, and it doesnt run to any nearby pad or component (Verifying incase it was running on an internal layer).

When I spoke to the devs a while ago, they said they didnt have any vehicles to test on which had GM UART couldn't test. I was hoping that meant they at least had the hardware there but appears not.
Your Local Aussie Reverse Engineer
Site:www.envyouscustoms.com
Mob:+61406 140 726
Image

User avatar
Posts: 4456
Joined: Mon Jan 04, 2010 10:23 am

Re: VXDiag VCX Nano

Postby The1 » Wed Apr 07, 2021 9:44 pm

Not sure if this is worth bothering with, I pulled my $25 aliexpress tactrix cable apart, pin 9 is hooked upto the chip pin 3rd down from top on the left. Infineon TLE6208 main IC is NXP LPC2366FBD100 which has 4 uarts.

IMG_20210407_211409.jpg

Posts: 167
Joined: Wed Jul 05, 2017 8:30 am
Location: TX USA

Re: VXDiag VCX Nano

Postby MudDuck514 » Tue Apr 13, 2021 3:01 pm

Hi all;

Anyone have a source for known good VCX Nanos?

I'm wanting to get one for working on my car and van.

Mike.

User avatar
Posts: 974
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Tue Apr 13, 2021 7:12 pm

Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

Posts: 167
Joined: Wed Jul 05, 2017 8:30 am
Location: TX USA

Re: VXDiag VCX Nano

Postby MudDuck514 » Wed Apr 14, 2021 1:03 am

Thanks Gampy.

I must have been daydreaming when I saw that post due to the pretty pictures!

Mike

User avatar
Posts: 974
Joined: Sat Dec 15, 2018 7:38 am

Re: VXDiag VCX Nano

Postby Gampy » Wed Apr 14, 2021 1:58 am

Thank you, I really needed that laugh!
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

PreviousNext

Return to Tools

Who is online

Users browsing this forum: No registered users and 2 guests