PowerPCM_Flasher: my tool for E38 and E67

Programs / Tools / Scripts
User avatar
Posts: 4
Joined: Sat May 22, 2021 1:27 pm

Re: PowerPCM_Flasher: my tool for E38 and E67

Postby Brian_Griffin » Wed Jun 09, 2021 8:20 am

Anyone using a VCX nano with this program?

User avatar
Posts: 1125
Joined: Sat Dec 15, 2018 7:38 am

Re: PowerPCM_Flasher: my tool for E38 and E67

Postby Gampy » Wed Jun 09, 2021 8:48 am

Brian_Griffin wrote:Anyone using a VCX nano with this program?

If you are asking if it has been tested with the Nano I would have to say yes ... I do know some of the testers have Nano's at least.

I personally have not done so.

Are you having an issue with it ??
Feed the beast, the beast gets bigger, DON'T FEED THE BEAST!

Posts: 1
Joined: Thu Jun 17, 2021 11:58 am

Re: PowerPCM_Flasher: my tool for E38 and E67

Postby 71403 » Thu Jun 17, 2021 12:16 pm

Thanks for your awesome work on this! Trying ver 0.0.0.6 with a VSI-2534 interface on Win7 by manually entering the dll path. Tried two different ECMs an '09 1265455 and a '12 12633238 both get the following error:
Code: Select all
connecting...
start diagnostic session (0x10 0x03)...ok.
disable normal communication (0x28)...ok.
security access (0x27)...
    request seed...ok.
    seed:     0x0000077D
    key:     0x0000A185
    sending key...ok.
request programming mode...ok.
sending enable programming mode...done.
downloading prog...
busy.
NOT ok, no reply frames (0x36).
prog download not ok.
upload flash...
NOT ok, (0x35).
*Debug*:  7F 35 11 AA AA AA AA


Have tried with a VCXNano also but even less success. This is on a bench with no other devices on the bus.

Previous

Return to Tools

Who is online

Users browsing this forum: No registered users and 3 guests