DIY Hub Dyno -Baller version

[antus]

looking very nice and professional

[Tre-Cool Profile Website]

Spent $270 at jaycar during the week & picked up some IP67 plugs/connectors to pass wiring through the back of the cabinet.

Since I want to be able to unplug everything & since the power cable feed to retarders is unpluggable, the load cell, speed sensor also need to be to.

All 3 cables will then be put together & i'll use some heavy duty spiral wrap to protect them.

I will do a similar thing with the incoming power feed & some ethernet cabling which will be used to trigger inputs on Fan VSD's.

Picked up the 2nd Power supply & mounted/wired in the connectors.

PS-Mounted-Switches.jpg (48.42 KiB) Viewed 2660 times

[Tre-Cool Profile Website]

Latest photo's.

Wired in the analog sensor wires to some connectors & mounted on a box, which is then mounted to dyno cabinet.
Includes the emergency stop button & 4 bar map sensor, dual haltech wideband, can hub & bluetooth antenna for SP6 controller.

Dyno-Box.jpg (95.67 KiB) Viewed 2559 times

Dyno-Box2.jpg (100.77 KiB) Viewed 2559 times

Dyno-Box3.jpg (160.9 KiB) Viewed 2559 times

Includes the emergency stop button & 4 bar map sensor

Dyno retarder is dummy assembled, doing some final mods tomorrow to level shaft.

[antus]

looking good

[Tre-Cool Profile Website]

So i got the retarders to the workshop a couple of weeks ago, only had a chance to have a quick play before i flew out for work. Found that we had a bit of a vibration happening on 1 of the retarders before it eventually moved in the pillow block & made slight contact with the frame.

On easter friday i moved retarder back into position, drilled pillow block grub screws a bit deeper into the shaft, then attempted to fix the alignment problem by eye-balling it. Ended up shimming 1 side of the retarder and 1st pillow block before the end. No more vibrations & the coupler no longer moves around a whole bunch.

Put my ute back on for some testing again, before i started messing with the boost controller, didn't really make any changes to the tune since the wideband sensor appears to have shit it-self, but love the repeatable power runs it does.

Anyway i took my garmin virb camera down on sunday & recorded this video.
https://youtu.be/1iJSnMotyZU

[Gareth]

Hell yeah!!!!

[antus]

Thats awesome, well done!

[hjtrbo Profile]

Simply awesome. Very well done!

Could you let us know the final cost of all the parts excluding labour. I've always wanted to do exactly what you have just done.

[NSFW]

Great job!

[vlad01]

Looks good.