wideband O2 sensor & tunerpro V5
Re: wideband O2 sensor & tunerpro V5
ok guys have got the wideband up and running, have taken a couple of logs.. just can't seem to copy the w/band o2 log into excel.. can copy any table in tuner pro or excel, just can't seem to copy off the log.. any suggestions on wat i'm missing would b helpful cheers??
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: wideband O2 sensor & tunerpro V5
Can either use "Export Log File" from the Acquisition menu to get a CSV file for excel or just copy/paste from the history tables straight to excel - to copy there is no right click in the history table view so use the keyboard shortcut ctrl C (hold control and press C).
Re: wideband O2 sensor & tunerpro V5
VL400 wrote:Can either use "Export Log File" from the Acquisition menu to get a CSV file for excel or just copy/paste from the history tables straight to excel - to copy there is no right click in the history table view so use the keyboard shortcut ctrl C (hold control and press C).
Thanx.. knew i was missing something.. with the tables being different sizes do i just modify the table in excel to suit??
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: wideband O2 sensor & tunerpro V5
Yes, but theres a spreadsheet to help here:
edit: removed link
edit: removed link
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: wideband O2 sensor & tunerpro V5
antus wrote:Yes, but theres a spreadsheet to help here:
edit: removed
apparently i'm not authorized to view that that thread
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: wideband O2 sensor & tunerpro V5
haha yeah the link goes to the admin section where the spreedsheet is ant
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: wideband O2 sensor & tunerpro V5
Doh!
No wonder I was having trouble finding it. Here it is:
Its set up for 2 bar.
Note that its absolutely important that your wideband is calibrated properly, and reading accuratly in the pcm's data stream.
No wonder I was having trouble finding it. Here it is:
Its set up for 2 bar.
Note that its absolutely important that your wideband is calibrated properly, and reading accuratly in the pcm's data stream.
- Attachments
-
- VE by Histogram.xls
- (156 KiB) Downloaded 410 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: wideband O2 sensor & tunerpro V5
HaHa Thanx guys that looks heaps better
Re: wideband O2 sensor & tunerpro V5
ok got it running again. having lean surging problems tho.. help plz lol
Am running standard injectors with the diffuser plates drilled out, OSE 12$P bin & 1,2&3 bar xdf, Have uploaded a idling log if someone could take a look & throw up any suggestions cheers
Am running standard injectors with the diffuser plates drilled out, OSE 12$P bin & 1,2&3 bar xdf, Have uploaded a idling log if someone could take a look & throw up any suggestions cheers
- Attachments
-
- rough idle.xdl
- (123.47 KiB) Downloaded 334 times
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: wideband O2 sensor & tunerpro V5
8 cylinder mode and 8 cyl memcal flags are on when i veiw the log and map is real high what sort of setup you running not a throttle in front of blower intercooled setup
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem