wideband O2 sensor & tunerpro V5
wideband O2 sensor & tunerpro V5
Just wondering if anyone can tell me if i need a wideband sensor kit or whether just the wideband sensor to replace the narrow band sensor?? some info on wiring it to an 808 would b helpful to cheers..
Re: wideband O2 sensor & tunerpro V5
wideband kit will have a linear output for linking to the ecu/pcm, some pcm's will need a modded bin depending on the input your wiring it to, wideband will not run on the ecu/pcm narrowband input.
Re: wideband O2 sensor & tunerpro V5
The1 wrote:wideband kit will have a linear output for linking to the ecu/pcm, some pcm's will need a modded bin depending on the input your wiring it to, wideband will not run on the ecu/pcm narrowband input.
cheers the bin is suited to wideband & narrowband was mainly wondering if the wideband kit was needed or just the sensor as i'm not worried about having a gauge in car just wanting it to show on laptop
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: wideband O2 sensor & tunerpro V5
You will need the controller, the wideband sensor works differently to a narrow band sensor.
Re: wideband O2 sensor & tunerpro V5
VL400 wrote:You will need the controller, the wideband sensor works differently to a narrow band sensor.
K, Cheers 4 that. That's all i need to know for now
Re: wideband O2 sensor & tunerpro V5
Hey quick question, could some one tell me wat wire on the ecu i need to hook the wideband sensor to? ose $12pv111_2bar adx, ose $12pv111 1,2&3bar xdf in a 808 ecu
Re: wideband O2 sensor & tunerpro V5
D8 is the wideband linear input pin
Re: wideband O2 sensor & tunerpro V5
The1 wrote:wideband kit will have a linear output for linking to the ecu/pcm, some pcm's will need a modded bin depending on the input your wiring it to, wideband will not run on the ecu/pcm narrowband input.
yeah am using OSE $12v111 BLCD which is compatible for wide and narrow band.. just need to know wat wire on the ecu to use.. Do i use a different wire and use them both simultaneously or do i use the original wire & disable narrow band & enable wide band on the bin..
Re: wideband O2 sensor & tunerpro V5
As above, narrowband remains to control closed loop, think of wideband as your viewer of your AFRs nothing else, its to help guide you with fuel tuning.
Re: wideband O2 sensor & tunerpro V5
Thanx Heaps peep's.. will hook that up & check it out