I have an unusual problem with the compare feature on TunerPro.
When I load a compare program all the maps are way out of wack.
Even if I use the same bin file the maps are all wrong.
I have left a message on the TunerPro site but nobody has been able to solve the problem.
It did work before so I reloaded the program but still the same.
Hope someone can help.
Thanks
Dave
Problem with TunerPro
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Problem with TunerPro
would be handy to know what files and xdf's your using
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Problem with TunerPro
I am using $12P and have tried using the same BIN and the same thing happens. All out of wack only with the maps. Everything else works fine.
Hope someone can help.
Hope someone can help.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Problem with TunerPro
Works for me in TP build 5.00.7774, 12P BLCF vs BLCD below. What bin are you using and comparing? It must be a 12P bin and of the same version as the XDF (ie current version is V111)
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Problem with TunerPro
Just tried it on my notebook that I use for data logging and it works fine but not on my PC. This is wierd.
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Problem with TunerPro
Fixes it. There is a bottone to the right of the compare button and I ticked it and all works fine. It shows the difference. I must have ticked it and it stays that way till you tick it again.
Thanks
Thanks