Want to add a wide band O2 sensor, Kit suggestion?
-
Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Want to add a wide band O2 sensor, Kit suggestion?
my MTX-L is located in the inner passenger gauge, but its not a daily driver!
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Want to add a wide band O2 sensor, Kit suggestion?
appeared to have successfully extended the lead on the sensor last night, seems to operate as normal
-
VQTURBO
- Posts: 23
- Joined: Mon Apr 25, 2016 5:39 pm
- cars: Vq caprice with a worked turbo v6, a cammed as fuck vn v6 commodore, 94 Landcruiser and a 2008 sr5!
- Location: Cairns NQLD
Re: Want to add a wide band O2 sensor, Kit suggestion?
Which wire from the MTX-L do I use for the ecu pin out?
-
Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Want to add a wide band O2 sensor, Kit suggestion?
yellow or brown will both work, I believe yellow is analogue 1 and should be already setup for wideband input where as analogue 2 I think is to simulate narrowband ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
VQTURBO
- Posts: 23
- Joined: Mon Apr 25, 2016 5:39 pm
- cars: Vq caprice with a worked turbo v6, a cammed as fuck vn v6 commodore, 94 Landcruiser and a 2008 sr5!
- Location: Cairns NQLD
Re: Want to add a wide band O2 sensor, Kit suggestion?
would i need to wire in the analogue 2 narrow band simulation wire too?
Re: Want to add a wide band O2 sensor, Kit suggestion?
I've never worried about that. On my spartan the simulated output didn't appear to accurate anyway.
Possibly my fault too who knows.
Possibly my fault too who knows.
-
VQTURBO
- Posts: 23
- Joined: Mon Apr 25, 2016 5:39 pm
- cars: Vq caprice with a worked turbo v6, a cammed as fuck vn v6 commodore, 94 Landcruiser and a 2008 sr5!
- Location: Cairns NQLD
Re: Want to add a wide band O2 sensor, Kit suggestion?
ok sweet cheers