just starting

[nigel o'eill]

hi iam looking at been able to tune delco vn - vx
iam looking at tools to use for the tuning and what i need to do this
nvram seam to be they way to go.can i do a real run time then send it to a eprom and chip so i can use the same ecu over and over.
and what is the best for flash tuning as well .
i have my owe dyno and would like to be able to tune with tools you guys recommend
all help need thanks

[antus]

Hi,

Yes you can tune with an nvram and then write that tune to an eeprom.

A good place to start is to have a read of the guides in the FAQ link near the top right of the page.

[nigel o'eill]

so do I need a nvram for each ecu.or can I use the same one and just change the bins and files.
were can I buy the nvram all ready in the ecu.also need some were to but eprom and chips to do this
I use tuner pro rt for j3 chips.
I just need to research the bins and files as I think it all shed be the same.

[antus]

Yes you can tune with an nvram and then write that tune to an eeprom/eprom/memcal with a willem gq-4x. Products are in the for sale section. Order via PM to VL400.

[nigel o'eill]

were is the best place to find bins and def as i have a couple but they
not right ve table is all jubled

[nigel o'eill]

can some help me out
i know the 808 is not flash abl
in what series commodore are the ecu flashable with out removeing memcal or chips.
and what is the best tuning gear for them ecu

[vlad01]

best gear currently it the 808 with NVRAM and USB comms board.

Its the best value of money, most feature packed and most well documented and by far has the most resources.


i don't think the later flash bases ECUs can do real time tuning without NVRAM anyway?

[nigel o'eill]

is there a nvram for all models.
or is there just one.
i was talking with moates and he advised me that there is not a nvram for the 808.
but i read on hear that it is wrong.
can you get the nvram with a base tune in them when you but them.
thanks

[Holden202T]

yeah there is a nvram module for the 808, VL400 sells them here: http://pcmhacking.net/forums/viewtopic.php?f=14&t=167

and he can program it with whatever tune you would like.

[nigel o'eill]

haveing trouble with the bins and files.can any one give me a list of what bins go with def.i open them and these not a thing there .must be missing some thing