Virtual Dyno
Virtual Dyno
Hi all,
Has anyone ever used a program called virtual dyno? Just wondering if it is a useful tool or not. Here is the link to it http://www.virtualdyno.net
Thanks,
vc81
Has anyone ever used a program called virtual dyno? Just wondering if it is a useful tool or not. Here is the link to it http://www.virtualdyno.net
Thanks,
vc81
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Virtual Dyno
looks pretty cool and sort of works after a 10 minute play just need some logs done especially i dont have many power run style logs but ive cut one up in csv format and did get a power curve to display
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Virtual Dyno
Similar program anyone use engine analyzer?
Re: Virtual Dyno
What details did you put in for the type of vehicle delco? Or did you just use the Monaro one?delcowizzid wrote:looks pretty cool and sort of works after a 10 minute play just need some logs done especially i dont have many power run style logs but ive cut one up in csv format and did get a power curve to display
- Attachments
-
- virtual dyno.JPG (47.22 KiB) Viewed 6894 times
Re: Virtual Dyno
here's a cut CSV from my dyno log and my dyno graph if someone wants to play, i setup a custom car but it came up with 270HP @ 5339rpm the run was in 2nd gear
- Attachments
-
- HoldenCommodoreAuto.xml
- (700 Bytes) Downloaded 471 times
-
- graph.jpg (168.84 KiB) Viewed 6864 times
-
- First Dyno Run STOCK.jpg (784.07 KiB) Viewed 6864 times
-
- test.csv
- (80.33 KiB) Downloaded 335 times
-
- Posts: 1831
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Virtual Dyno
How do you get it to work? I tried loading your test run but nothing happens?
Re: Virtual Dyno
you need to setup a custom car which is the file i attached, once that's in your custom catagories in cars list then you can open a log, it will show up on the left then and you can select the custom car and fill in all the details and play with the graph. My tyres are 235/45/17
-
- Posts: 1831
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Virtual Dyno
OK got it now. I made up a custom car for my car but the log I tried was too large. I need to cut out a portion of a tunerpro log and use that or just record a specific log. Thanks
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Virtual Dyno
you can veiw raw csv data in the program and cut out a section thats at full throttle and rpm rising.its a bit of a pain to use but shows promise.going out and doing a heap of full throttle launch logs would be the way
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Virtual Dyno
yeh like anything i guess just use it as a reference is you can't get to a dyno, use the same settings, ill dig up my other log as this one is before i put the rockers on and do an after rocker comparison.