This is a stand-alone app that can reflash both the calibration as well as the OS on a '411 type PCM. This works with the AVT-852 and provides a simple interface to reflash the PCM. To handle reflashes, the app will require a full 512k bin to work with, and to start you can simply select the download bin from the drop down to save a copy of your bin. From there you can use TunerPro to edit the bin to make changes, then re-upload. Typical cal reflash time is < 1min. An OS reflash will take about 3 minutes.
To get to the more advanced features, there is a hidden control in the lower leftmost part of the window. Double clicking there will bring up the advanced features. To do an OS refash, you check the 'Flash OS' box and follow the usual instructions for reflashing. Then in standard mode reflash the bin again to do the new calibration for the OS. A full reflash requires two flashes. This is a safety feature to prevent corrupting the OS since in standard mode, no writes are allowed in the OS sector.
The DL and more discussion are here http://www.thirdgen.org/forums/diy-prom ... ost5844169
LS1 Reflash Tool for 512k PCMs
-
- Posts: 10
- Joined: Sun Jul 10, 2011 2:20 pm
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: LS1 Reflash Tool for 512k PCMs
Nice work!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: LS1 Reflash Tool for 512k PCMs
AWESOME Work, can't wait to test it out!
Re: LS1 Reflash Tool for 512k PCMs
that looks awesome now where do I get an avt-852 cable from?