What wide band tail pipe bracket are people using?
What wide band tail pipe bracket are people using?
Done some tuning on a car today using my wide band mounted at the tail pipe on my home made bracket.
The readings weren't very accurate. Might look at buying one of the innovate one's.
After some improvising I had improvements. This car had no provision to fit one in the extractors like normal.
Post up some pics or links I'd be interested to see what others are using.
The readings weren't very accurate. Might look at buying one of the innovate one's.
After some improvising I had improvements. This car had no provision to fit one in the extractors like normal.
Post up some pics or links I'd be interested to see what others are using.
Re: What wide band tail pipe bracket are people using?
Was thinking of getting one of these
http://superiorautoparts.com.au/innovat ... clamp.html
http://superiorautoparts.com.au/innovat ... clamp.html
Re: What wide band tail pipe bracket are people using?
Why don't you just get a bung welded in ? Be cheaper
Re: What wide band tail pipe bracket are people using?
Yeah if it was mine maybe, but its a one off tune and not my car and ceramic coated exhaust so best not unfortunately. Makes it harder i know.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: What wide band tail pipe bracket are people using?
Have an innovate clamp, used it a couple of times on cars with no cats and was ok with stable readings. Nearly fell off once so now gets cable tied so it will just swing and not end up dragging along.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: What wide band tail pipe bracket are people using?
my innovate clamp didnt work great in certian areas like idle especially LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: What wide band tail pipe bracket are people using?
Yeah tailpipe sniffer that my local dyno uses is completely 100% useless for idle. Have to tune idle by ear there!
Re: What wide band tail pipe bracket are people using?
Seems to be common. What do you use now?delcowizzid wrote:my innovate clamp didnt work great in certian areas like idle especially LOL
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: What wide band tail pipe bracket are people using?
this is why I have a second bung in my exhaust for the dyno
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: What wide band tail pipe bracket are people using?
we have an innovate, dyno dynamics and microtech, all work fine for me
must admit that the innovate one can fall off too easily on the road though... we always tie them to the car.
bung is the easiest way for ongoing tuning
must admit that the innovate one can fall off too easily on the road though... we always tie them to the car.
bung is the easiest way for ongoing tuning
According to chemistry, alcohol is a solution...