Logging fuel pressure

Programs / Tools / Scripts
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Logging fuel pressure

Post by VL400 »

If you are woried about the life of the sensors like I was after hearing a few have failed, there is a GM fuel pressure sensor.

Sensor: ACDelco #13500745, 0-100psi, Linear 0-5V output
Connector: Delphi #13511131 qty. 1
Terminal: Delphi #12191818 qty. 3
Secondary Lock: Delphi #15418545 qty. 1
Wire Seal: Delphi #15366060 qty. 3

Pin 1: Vout
Pin 2: Ground
Pin 3: +5vdc

The thread in the sensor is a metric parallel, so as pictured o-ring sealed. The TPI is very close to 1/8 NPT, so I just ran a NPT bottoming tap and used Speedflow 911-02 as an adapter to the fuel rail.
600_7189.jpg
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Logging fuel pressure

Post by Holden202T »

whats the thread inside it something metric ? only thing above missing is the speedflow part number :lol: :thumbup:
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Logging fuel pressure

Post by VL400 »

Fixed that for you :thumbup:
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Logging fuel pressure

Post by Holden202T »

also just to add info, i found this one is the correct one for the above mentioned connector part #

https://www.eficonnection.com/home/prod ... or-pigtail
FXST02
Posts: 107
Joined: Thu Jul 12, 2012 8:42 pm
cars: VP V6 Auto sedan
Location: Perth WA

Re: Logging fuel pressure

Post by FXST02 »

What was used to power the 5V transducer? The 5V wire at the MAP/IAC ?
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Logging fuel pressure

Post by Holden202T »

yeah anything like that should work, when I did mine it was an input into the data logger, and I just used the loggers 5v's
Post Reply