Hi, Im just after where I can purchase some NVRAM and EEPROM Chips from to suit both the vn/vr and the later vs PCMs.
I also need the cable so I can log the data from the ALDL connector and also flash the NVRAM chips.
I need some VS EEPROM chips asap
I have a Willem Programmer and a UV eraser already.
I also need an adaptor so I can plug the memcal into the programmer without removing the chip from the holder.
Thanks.
Getting the gear to tune these PCMs
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Getting the gear to tune these PCMs
I can help with ECM NVRAM, and ALDL interfaces. Biggvl can help with PCM NVRAM and ALDL interface.
Im not sure any one does EEPROMs, but there are some sellers that have worked out OK on ebay so far. Search the forums for more information. Or I can help with a couple. Im not a shop though, have a limited collection on hand.
Adapters you can make yourself with a couple of rows of pins from jaycar or similar and some vero board.
PM me or biggvl if that sounds like what your after.
Im not sure any one does EEPROMs, but there are some sellers that have worked out OK on ebay so far. Search the forums for more information. Or I can help with a couple. Im not a shop though, have a limited collection on hand.
Adapters you can make yourself with a couple of rows of pins from jaycar or similar and some vero board.
PM me or biggvl if that sounds like what your after.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 8
- Joined: Sun Mar 18, 2018 7:51 am
- cars: 1964 EH Holden gt35 turbo 202 elite 2500
2004 VY SS Crewman
2013 VF SSV redline cammed LSA supercharged 600rwhp
Re: Getting the gear to tune these PCMs
Can you pm me some more info and prices for these bits. Thanks.
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Getting the gear to tune these PCMs
Click thd faq link in the top right and look at the hardware and software guide.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 8
- Joined: Sun Mar 18, 2018 7:51 am
- cars: 1964 EH Holden gt35 turbo 202 elite 2500
2004 VY SS Crewman
2013 VF SSV redline cammed LSA supercharged 600rwhp
Re: Getting the gear to tune these PCMs
I successfully read, erased and burned my first chip today. winning! ![punk :punk:](./images/smilies/punk.gif)
![punk :punk:](./images/smilies/punk.gif)
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Getting the gear to tune these PCMs
let the tuning begin!Coretuned wrote:I successfully read, erased and burned my first chip today. winning!
No matter what the question is, the answer is always more horsepower! ![turbo :turbo:](./images/smilies/TurboSmiley.gif)
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
![turbo :turbo:](./images/smilies/TurboSmiley.gif)
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread