VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Programs / Tools / Scripts
User avatar
Gareth
Posts: 2505
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by Gareth »

Nah, I've had several :lol: :lol: :lol: :lol:
According to chemistry, alcohol is a solution...
jxx
Posts: 153
Joined: Tue Oct 25, 2011 7:47 pm
cars: To many
Location: Vic

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by jxx »

Tazzi wrote:It hates life... I believe I have the first emo ECU. :roll:
But did it cut itself?


I did spam that command (100 times with 100ms delay) and switch ign input off and on while it was still hammering the CAN bus, figured i had nothing to loose.
 
jxx
Posts: 153
Joined: Tue Oct 25, 2011 7:47 pm
cars: To many
Location: Vic

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by jxx »

Tazzi wrote:Im going to give a 0x0000 value a go which is the equivalent of this:
7E0 07 AE 7D 08 00 00 00 00

Whereas an ASCII 0000 immo code would look like this:
7E0 07 AE 7D 08 30 30 30 30

Is it just we use different methods for logging code/(programs for sending) and your string doesn't show the message length?

I did read through that thread before posting and saw what worked for me was slightly different
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by Tazzi »

jxx wrote:
Tazzi wrote:Im going to give a 0x0000 value a go which is the equivalent of this:
7E0 07 AE 7D 08 00 00 00 00

Whereas an ASCII 0000 immo code would look like this:
7E0 07 AE 7D 08 30 30 30 30

Is it just we use different methods for logging code/(programs for sending) and your string doesn't show the message length?

I did read through that thread before posting and saw what worked for me was slightly different
Your logger outputs the 'frame size' straight after the CAN ID, this is not actually part of a CAN message but your logger is just indicating how much data has been sent.

So we have sent the same command, mine just doesnt work :thumbdown:
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by hsv08 »

Still seem to not be able to relink even after resetting the pim. Log below.

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Enable debug
10 - EXIT

Enter function to perform:3
Input Current PIM Pin Code:
6370

** Running PIM Reset Procedure **

** PIM Busy **

** Waiting **

** PIM Reset Successful **

Press any key to return to main menu



E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Enable debug
10 - EXIT

Enter function to perform:

E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Enable debug
10 - EXIT

Enter function to perform:2

Seed/Key Unlock Successful

** Requesting PIM Relink with ECU **
INFO: Buffer Empty No Response

** ECU/PIM Relink Procedure Failed **

Press any key to return to main menu
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by The1 »

Can you retry with debug enabled? Wel see what it's saying
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by hsv08 »

The1 wrote:Can you retry with debug enabled? Wel see what it's saying
Yeah will give it a shot tomorrow :)
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by hsv08 »

E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - Run ECU Seed/Key Unlock
8 - Connect to J2534 device
9 - Enable debug
10 - EXIT

Enter function to perform:9

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - Run ECU Seed/Key Unlock
8 - Connect to J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:8
*********************************************************

Select Device:
*********************************************************
1 - MDI
2 - MDI 2
3 - Tech2
4 - VXDIAG

Input Device Number:1
DEBUG: Using DLL: C:\Program Files (x86)\GM MDI Software\Products\MDI\Dynamic Link Libraries\BVTX4J32.dll
DEBUG: Cable Connected: True

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - Run ECU Seed/Key Unlock
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:2
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response

** Requesting PIM Relink with ECU **
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response


E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - Run ECU Seed/Key Unlock
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by hsv08 »

Enter function to perform:9

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - Run ECU Seed/Key Unlock
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:2
DEBUG: GetMessage response is 000007E8046701BA60000000
DEBUG: SendMessage Response is 6701BA60000000
DEBUG: Seed Received DEC: 47712 HEX: BA60
DEBUG: Calculated ECU Unlock Key DEC: 38444 HEX: 962C
DEBUG: GetMessage response is 000007E80267020000000000
DEBUG: SendMessage Response is 67020000000000
DEBUG: ECU Reply to Seed 67020000000000

Seed/Key Unlock Successful

** Requesting PIM Relink with ECU **
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response


E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:3
Input Current PIM Pin Code:
6370
DEBUG: Current PIM Pin 36 33 37 30

** Running PIM Reset Procedure **
DEBUG: GetMessage response is 00000644037F3B7800000000
DEBUG: SendMessage Response is 7F3B7800000000
DEBUG: SendMessage Response is 7F3B7800000000

** PIM Busy **

** Waiting **
DEBUG: Response After PIM Busy is 00000644027B607800000000

** PIM Reset Successful **

Press any key to return to main menu



E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:

E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:2
DEBUG: GetMessage response is 000007E8046701BA60000000
DEBUG: SendMessage Response is 6701BA60000000
DEBUG: Seed Received DEC: 47712 HEX: BA60
DEBUG: Calculated ECU Unlock Key DEC: 38444 HEX: 962C
DEBUG: GetMessage response is 000007E80267020000000000
DEBUG: SendMessage Response is 67020000000000
DEBUG: ECU Reply to Seed 67020000000000

Seed/Key Unlock Successful

** Requesting PIM Relink with ECU **
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response
DEBUG: SendMessage Response is 00000490037F3BA336333730

** ECU/PIM Relink Procedure Failed **

Press any key to return to main menu



E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:

E55Tool VZ V6 Tool V1.4

*********************************************************
Written By IronDuke & The1 pcmhacking.net
J2534 dll used from https://github.com/BrianHumlicek Modded By IronDuke

If this Program Saved you Time/Money then Please Donate

Paypal nigel@eyeit.org for Further Devs

*********************************************************
************** E55Tool VZ V6 Main Menu ****************
*********************************************************
1 - ECU Bruteforce Pin Reset Menu
2 - ECU/PIM Relink
3 - Reset PIM
4 - Write VIN
5 - ECU Information
6 - Advanced Menu
7 - ECU is Seed/Key Unlocked
8 - Disconnect from MDI J2534 device
9 - Disable debug
10 - EXIT

Enter function to perform:2
DEBUG: GetMessage response is 000007E8046701BA60000000
DEBUG: SendMessage Response is 6701BA60000000
DEBUG: Seed Received DEC: 47712 HEX: BA60
DEBUG: Calculated ECU Unlock Key DEC: 38444 HEX: 962C
DEBUG: GetMessage response is 000007E80267020000000000
DEBUG: SendMessage Response is 67020000000000
DEBUG: ECU Reply to Seed 67020000000000

Seed/Key Unlock Successful

** Requesting PIM Relink with ECU **
DEBUG: SendMessage Response is
INFO: Buffer Empty No Response
DEBUG: SendMessage Response is 00000490037F3BA336333730

** ECU/PIM Relink Procedure Failed **

Press any key to return to main menu
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by The1 »

ecu is reset? Pim at the end is saying 7F access denied, im not sure if the pim has a timer or not ive had something similar before and after retrying while leaving the pim in a reset state for an hour it then worked.
Post Reply