VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Programs / Tools / Scripts
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by hsv08 »

No relink.png
No relink.png (30.35 KiB) Viewed 2644 times
Also still seem to get no relink. Just says buffer empty on all 6 ecus I have here. The calibration numbers etc have sorted themselves out in the latest version but still have empty buffers in all versions
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by The1 »

is the PIM Reset? Otherwise there will be no reply from PIM to that command.
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by hsv08 »

The1 wrote:is the PIM Reset? Otherwise there will be no reply from PIM to that command.
No Pims are not reset. They still maintain their original pins. Will try reset first
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by The1 »

Gampy wrote:If you have the entries from both installations I'd sure like to have a copy of them ... in NT4 reg version.

What about under,
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB
What else is common between them ... Do they install in the same locations ??
A dll that is in a common place and gets over written by each other.
here's both locations with both cables installed, MDI working in tech2win and connecting in J2534 passthrough but no data send/receive and VXDiag working fine in J2534.

Let me know if you need them with either one installed.
Attachments
Both Installed REG.7z
(5.42 KiB) Downloaded 156 times
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by The1 »

hsv08 wrote:
The1 wrote:is the PIM Reset? Otherwise there will be no reply from PIM to that command.
No Pims are not reset. They still maintain their original pins. Will try reset first
Yep run the reset command with original pin, it will still retain that pin, im guessing the reset command just flips a bit in the eeprom to then allow the code to run for relinking.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by The1 »

ok from playing a bit more it looks like a hardware level thing also, i can have the vxdiag and tactrix cable working together fine, then as soon as i plug in the MDI it kills them both and send/receive data is gone. Unplug the MDI and both working again.

Using them by themselves i still can't get J2534 working on MDI without removing vxdiag.
User avatar
Gampy
Posts: 2331
Joined: Sat Dec 15, 2018 7:38 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by Gampy »

I suspect the VXDiag is masquerading as the MDI by hijacking the MDI's Vendor ID and Product ID ... Just a guess.
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by The1 »

Yeh some funny business with the drivers i suspect as when i have vxdiag setup if i use MDI driver it still uses vxdiag cable.
User avatar
Gampy
Posts: 2331
Joined: Sat Dec 15, 2018 7:38 am

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by Gampy »

I would be looking heavily at the registry entries at Enum\usb ... between the two.

[edit]
What's interesting is the VCXDiag and Tactrix have the same Vendor ID ... :o :wtf:
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
User avatar
Tazzi
Posts: 3422
Joined: Thu May 17, 2012 8:53 pm
cars: VE SS Ute
Location: WA
Contact:

Re: VZ V6 E55 ECU Brute Force Reset Tool & PIM Relink

Post by Tazzi »

Gampy wrote:I would be looking heavily at the registry entries at Enum\usb ... between the two.

[edit]
What's interesting is the VCXDiag and Tactrix have the same Vendor ID ... :o :wtf:
ftdi chipset?? I know the VCX Diag definitely uses FTDI.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Image
Post Reply